User Manual

Step 4: Temporarily Mount the Outside Antenna
Use one of the three options to mount the outside antenna on your roof on the side of
the house with the strongest signal
In order to achieve the best signal coverage effect,
there is a certain distance requirement between the
indoor and outdoor units. Make sure the inside and
outside units are facing away from each other.
Minimum Required Separation Distance Between
Indoor and Outdoor Antenna：
20 ft (6 meters) horizontal distance
13 ft (4 meters) vertical distance(As far as possible)
Make sure to meet the Minimum Separation
Requirements while at the same time mounting the
outside unit in the location with the strongest signal.
7
Caution
Step5: Connect the System
1. Connect the outside antenna to the 30
feet RG6 cable, fix the connector(In order to
avoid internal damage of the antenna
connector due to gravity or pulling the cable)
Secure the cable near the antenna
to prevent cable damage caused
by wind shaking