Technical Manual

22
Test Screen Description
Computer on Board
Machine Number:
Number of the machine configured.
Odometer/Hours
meter:
The odometer and hours meter configured on the CAN BUS.
Speed:
Equipment speed.
RPM:
Actual RPM of the equipment measured by the computer on board, by the
CAN BUS net.
Status:
Actual status of the machine:
F: Stopped
C: Harvest
M: Maneuver
D: Moving
CF card:
Actual state of memory card Compact Flash: Error or OK.
ENTRYS
Digital Input:
Digital Input activated by the computer on board (0000 → ED1, ED2, ED3,
ED4).
Pulse Input:
Pulse input values (00 → EP1, EP2).
External Input:
Feed.
Analogue 1:
Value measured by the computer on board on the EA1.
Analogue 2:
Value measured by the computer on board on the EA2.
Analogue 3:
Value measured by the computer on board on the EA3.
GPS
GSP valid:
Actual GPS – Valid or not valid
Latitude:
Equipment Actual Latitude.
Longitude:
Actual Longitude of the equipment.
MODEM GPRS
Status:
It shows the status of the connectivity process of the modem GPRS (0 –
11).