Technical Manual

31
1.15. Zigbee Communication Test
The option “Zigbee Communication” allows to test the Zigbee on the computer on
board. Once it is selected, a communication internal test is done. If the test is
successful, the message “Zigbee Communication Ok” will appear. If the message
to appear were “Zigbee Communication Fail” the CB must be sent to maintenance.
1.16. Import Records
This option imports the registers saved on the tablet on the file
“data/Trabalho/Cadastros”. If there is any change on these files saved on the tablet,
it is necessary to select this option to enable the changes. After that, the message
“Records imported successfully” will appear.