Technical Manual

43
doesn’t ask: “How many crates were
lifted.?".
1: When the FLOW code is entered, it asks:
“How many crates were lifted.?".
NOFUTDESLOCCARR
Defines the usage of the stop time
“Transshipment Line”.
0: Enters on Transshipment Line on any
condition the stop time code with identifiers
is entered. ador "H".
1: It doesn’t enter on Transshipment Line
when the stop time code identifies with and
H if it was previously on moving for loading
stage.
CORRIGEDATAHFUT
Data and time correction using FLOW.
0: Doesn’t correct date or time using
FLOW.
1: Corrects the date and time using FLOW.
DATALIMITEFUT
Defines the validity activation data on the
FLOW app.
0: The FLOW app will be active indefinitely.
170720 (aammdd): The FLOW app will be
active until July 20, 2017.
TPARADABASC
Defines the stop time of the lifting stage to
ask for the stop time code (in seconds).
180: When the transshipment passes the
180 second on lifting stop time, it asks for a
stop time code.
NOBASCMANOBRA
Defines the possibility to enter on lifting
state on the status of loading cane and
maneuver.
0: It sends records of the lifting process
when loading cane and maneuver.
1: It doesn’t send lifting records on the
status of Loading and Maneuver.
BASCLEVANTACX
It Defines a time filter to start the lifting
status.
0: Applies 5 seconds filter to start the lifting
status when the crate is lifted.
1: it starts the lifting status immediately
when the crate is lifted.
LIMITABASC
Defines the lifting limit event for crate.
0: It doesn’t limit the lifting for crate.
1: It limits the lifting for the selected crate.
NOCOLHEDCARREG
Defines the condition that recognizes the
harvester.
0: Recognizes the harvester without
condition
1: It doesn’t recognize the first 5 minutes
loading.
HODOMETRO
Defines the info to be send on the orometer
and hour meter records.
0: It sends the orometer kijos (standard).
1: It sends hour meters kijos.