Hardware Description

XBee-PRO 900HP Specifications
XBee-PRO® 900HP/XBee-PRO® XSC RF Modules
© 2014
3
* To determine your range, perform a range test under your operating conditions.
Specifications of the XBee-PRO® 900HP/XBee-PRO® XSC RF Module
Specification
XBee
Performance
* Indoor/Urban Range
10kbps: up to 2000 ft (610m) 200kbps: up to 1000 ft (305m)
* Outdoor RF line-of-sight Range
10kbps: up to 9 miles (15.5km) 200kbps: up to 4 miles (6.5km) (with
2.1dB dipole antennas)
Transmit Power Output
24 dBm (250 mW) (software selectable)
RF Data Rate (High)
200 kbps
RF Data Rate (Low)
10 kbps
Serial UART interface
CMOS Serial UART, baud rate stability of <1%
Serial Interface Data Rate
(software selectable)
9600-230400 baud
Receiver Sensitivity (typical)
-101 dBm, high data rate, -110 dBm, low data rate
Power Requirements
Supply Voltage
2.1 to 3.6 VDC**
**Supply voltages of less than 3.0V may result in
reduced performance. Output power and
receiver sensitivity may be degraded.
Transmit Current
PL=4 : 215mA typical, (290mA max) PL=3 : 160mA typical PL=2 : 120mA typical
PL=1 : 95mA typical PL=0 : 60mA typical
Idle / Receive Current
29mA typical at 3.3V, (35mA max)
Sleep Current
2.5 pA (typical)
General
**Operating Frequency Band
902 to 928 MHz (software selectable channels)
Dimensions
1.297” x 0.962” x 0.215 (3.29cm x 2.44cm x 0.546cm) Note : Dimensions
do not include connector/antenna or pin lengths
Weight
5 to 8 grams, depending on the antenna option
Operating Temperature
-40° to 85° C (industrial)
Antenna Options
Integrated wire, U. FL RF connector, Reverse-polarity SMA connector
tal I/O
15 I/O lines,
ADC
4 10-bit analog inputs
Networking & Security
Supported Network Topologies
Mesh, point-to-point, point-to-multipoint, peer-to-peer
Number of Channels, user
selectable channels
64 channels available
Addressing Options
PAN ID, Preamble ID, and 64-bit addresses
Encryption
128 bit AES
Agency Approvals
Specifications of the XBee-PRO® 900HP/XBee-PRO® XSC RF Module