R Outdoor Wireless Solar Camera
Warranty Service Thanks for purchasing from Soliom. Having issues with your Soliom cameras? Please contact us through either ways below. Soliom care team staffs would offer you a best solution to solve any problems within 24 hours Register via below link to get 2 Years Extended Warranty . https://soliom.net/pages/product-registration Contact Us: : care@soliom.net Please text us for any product issues Join Soliom Customer group for instant help: https://www.facebook.
1-7 8-14 .15-16 .17-24 Part 5: How to Save and Delete Videos...............................25 Part 6: More Settings........................................................
Very Important Tips 1. Soliom camera can only be set up with 2.4g Wi-Fi network. (It's ok to use Cell phone 4G data to live viewing it after the camera was set up with 2.4g Wi-Fi network firstly.) 2. You may possibly need a Wi-Fi extender if your Wi-Fi signal is weak around the yard where you want to install it. 3. At least 1-3 hours direct sunlight to the camera every day is needed, the more sunshine the better to avoid manually charge it frequently.
Antenna White LED Solar Panel Bracket Silicone flap Bottom Reset Power switch USB SD Slot Speaker
Before Installation Charging Your Camera Please charge the camera about 10 hours by plugging it into a power source using the provided USB cable. After connecting the camera with App, the App will indicate the battery status. (There's no indicator to show charging status from the camera) uncover silicone flap Insert SD card Please format the SD card to FAT32 format (Application to Windows system ONLY), then install the micro-SD card when the camera is off.
Before Installation Note: After installed your micro SD card, pls match and tighten the silicone flap exactly to avoid leakage of rain water.
In-App Setup Make sure the distance between your phone, router and the camera is no more than 1.5 feet when you're ready to pair the camera. Ensure that the Wi-fi signal strength on your phone is good. 1. Download the App : Please locate the SOLIOM+in your Google Play store or App store to download the soliom+ App. 1.1 Allow"SOLIOM+" use mobile cellular data and wireless LAN, otherwise it may be failed to add S100 camera. 1.
In-App Setup 2. Register an account Open the App and register your account with your email address. (1) Open the app and register your account with your Email address and it is recommended to verify your account from email so that you can retrieve password of your Soliom account in case. (2) Set a password for your account and make note to remember it.
In-App Setup 4. Connect your phone to 2.4Ghz wifi first. Only work with 802.11 b/g/n frequency band 2.4G Wi-Fi . Not work with 802.11 ac or ax 5G or higher frequency band. (It's ok to use Cell phone 4G data to live viewing it after the camera was Paired up with 2.4g Wi-Fi network firstly.) 5.Install the antenna and point the antenna to the sky, antenna is not waterproof downward. (Note: the camera can not be paired up without antenna) 6. Turn on the camera Slide switch to the right to turn on the camera.
In-App Setup 7. Pairing the camera with the App Note: Please ensure that your phone connect to the 2.4Ghz wifi before you pair the camera, make sure your router password in mind before you start the pairing process. 1) Click "Add a device" and then choose "Setup device", click "Yes", when you hear the following voice “ The camera is now ready to begin pairing”. 2) When your phone or tablet connected well with your 2.
In-App Setup 3) Input the CORRECT WiFi password of your router, if you input a wrong password you will not be able to connect it successfully. Click the eye icon to double confirm the password you entered correct Your Wi-Fi name will be shown here automatically Click the icon to double confirm the password you entered correct Method 1: QR code configuration 1.
In-App Setup Method 2: Sound wave configuration 2.1 Enter into the “search device” page, make sure to turn up you phone’s volume to the Maximum, you will hear the following voice : “Pairing Information Received”. 3) You have connected the device to the App successfully. Choose a name of the devices from the drop-down choice, or you can modify one that you want, and then select the area where device is located.
In-App Setup 4) Congratulations! You have connected your camera to the App successfully, now you can live view the camera on your phone anytime and anywhere. If you're unable to pair the camera,Please check below suggestions: 1.Make sure your phone is connected with your 2.4G Wi-Fi. When your 2.4g Wi-Fi connected correctly to your phone,your Wi-Fi name will be recognized by the camera and pop-up on the Wi-Fi input page automatically. 2.
In-App Setup 8.How to Share Your Camera with More Users When you can use your camera properly.You can start to share your camera to your friends or family members. click“ ”and choose "share permissions". input the account that you want to share with.
In-App Setup 9.How to unbind your camera Please do not forget to unbind your camera from your App when you plan to return the camera, to avoid any personal information disclosure risk. And unbind your camera as following steps, click" " and then choose "delete” 2019-12-27 15:00:36 Online 10.Night Vision Mode The camera is defaulted as spotlight mode, you can tap on the spotlight bulb to change it to LED night vision mode, the spotlight will not be triggered to turn on when there's any motion.
In-App Setup Push Mode This icon indicate that the push mode is on, click it to turn off push mode and then you cannot receive any notifications. If you want to turn on or off the sound of notification, please refer to page 26. Note: When you turn off the notification here,the motion triggered events will keep recording to cloud or micro sd card as you set. 2019-12-27 15:00:36 2019-12-27 15:00:36 Online Online Cloud storage The motion detection video clips will be saved in the cloud.
Physical Installation 1 Check your camera signal strength If not satisfied with video smoothness, and signal strength in App is not strong, we would suggest adding wifi extender between the Router and the camera. Check in App Camera WiFi extender Router 2 Recommended height to install the camera We suggest installing the camera about 8ft. You may adjust the camera angle physically according to the live view in your mobile. to focus your motion area to get the more accurate motion triggered events.
Technical Specifications Image Quality Resolution 1080P Specifications Lens Lens angle FOV 155° Video Specifications Video format H.264+ SD card support 8GB-Max 64GB Output Built-in speaker Intput Built-in microphone WiFi 802.11 b/g/n frequency band 2.4G Wi-Fi Audio Communications Battery Battery capacity 8700mAh Standby time Max 12 months Power consumption 2W(run)/ 0.
Detailed App Instructions 1.click ,you could live viewing videos.
Detailed App Instructions Battery charging sign When camera exposed to sunlight, the battery will keep charging in green. During night or fully charged, the battery will stay white. Tips : If your battery sign will not show correct status as above,please remove the solar panel and then reinstall it to the camera body. Or contact Soliom support team for a replacement at care@soliom.net All friendly customer service staffs are ready to assist you.
Detailed App Instructions Setting: Click to enter into device settings. ( Check page 20-24 for more details) - 2019-12-27 15:00:36 by Online Click the icon to switch to full screen play Cloud storage: Click to switch playback videos saved in cloud storage or micro sd card. Manual Recording: Click to manually record and the videos will be saved to your phone's Album 10s 10s Screenshot: Click to screen capture and pictures will be saved to your phone's album. 10s Voice: Click the camera.
Detailed App Instructions SD Card Setting 1) Please turn on the cloud storage so that you can sync the camera time with your phone. Note: We suggest you to format the SD card to FAT32 in your app for the first use. 2019-12-27 15:00:36 Online 10s 10s 10s Image flip You can choose Normal Rotate, Mirror or Mirror and rotate depends on your hardware installation way. The default is Normal.
Detailed App Instructions Scene mode You can choose to set it as Normal, back light compensation, night IR, High light compensation or Dynamic according to your actual light environment of installation place. 2019-12-27 15:00:36 Online 10s 10s 10s Normal: Natural light at day time Backlight compensation: Increase the level of exposure and brighten the whole scene. High light compensation: Reduce exposure and deal with overexposed images with lights.
Detailed App Instructions 2019-12-27 15:00:36 Online 10s 10s 10s 10s Active time 1) This is the time you could set for the motion detection video length recorded to micro sd card and cloud storage. 2) Always: If you choose this option,you will not allow the camera enter into standby mode,the camera will keep recording all the time until battery drains out.
Detailed App Instructions LED indicator When you choose Enable, the Blue LED will light up to indicate when you operate the camera as it should be. When you choose Disabled, the Blue LED will not light up to indicate the operations or trigger motions. It is recommended to set it as the default 2019-12-27 15:00:36 Online 10s 10s 10s Power frequency Please choose 60 or 50HZ according to your local frequency. It's defaulted to 60HZ for united states users.
Detailed App Instructions Device Name You can set a desired name for your camera.
How to save and delete videos 1. Videos can be saved in Cloud Storage: (1). The videos of PIR activity You could save the videos of PIR activities in cloud storage, which can be used 30 days for free and then you have to pay for the services. and the videos in the Cloud can be playback in the app. 2. Videos can be saved in the SD card: (1). The videos of PIR activity (2). The videos of live viewing You could playback these videos in the app.
1. Cloud service: Click Cloud service and then choose the package to buy your cloud storage. Note: 1)Each camera will be binded with one cloud storage service.(But not in account base) 2)If you would like to make a return for Soliom cameras,please send email to: care@soliom.net to refund your cloud fee. 2.My friends: Click it to Add a friend you want to share with your camera or check you shared account or shared with you camera list and make any permission modifications here.
27
