R Outdoor Wireless Solar Camera Model: S90
Warranty Service Thanks for purchasing from Soliom. Having issues with your Soliom cameras? Please contact us through either ways below. Soliom care team staffs would offer you a best solution to solve any problems within 24 hours Register via below link to get 2 Years Extended Warranty . https://soliom.net/pages/product-registration Contact Us: : care@soliom.net 8335540901 Please text us for any product issues Join Soliom Customer group for instant help: https://www.facebook.
5-14 15-18 19-26 Part 5: How to Save and Delete Videos...................27 Part 6: More Settings.............................................................
Very Important Tips 1. Soliom S90 can only be set up with 2.4g Wi-Fi network. (It's ok to use Cell phone 4G data to live viewing it after the camera was set up with 2.4g Wi-Fi network firstly.) 2. When the battery runs out, the camera can only turn on automatically after the camera is charged more than 4 hours. 3. You may possibly need a Wi-Fi extender if your Wi-Fi signal is weak around the yard where you want to install it. 4.
Bracket Solar Panel USB port Micro-SD Power Reset USB Port Reset Power Cable for connecting external solar panel
Before Installation Charging Please charge the camera about 10-12 hours by plugging it into a power source using the provided USB cable. After connecting the camera with App, the App will indicate the battery status. (There's no indicator to show charging status from the camera) Micro-SD Micro-SD USB Port Power Power USB Port Reset Reset Install a micro SD card Please insert your micro sd card to the slot correctly according to the below picture.
Before Installation Package Content Camera 1 x Bracket 1 x USB Cable 1 x Allen key 4 x Expansion Screws 1 x Allen key R Outdoor Wireless Solar Camera Model: S90 Stick the position paper on the wall where you want to install the camera,and drill hole on the red circle Tear off after drilling 2 x Luminescent Warning Sticker 1 x User Manual 4 1 x Position Paper
In-App Setup Make sure the distance between your phone,router and the camera is no more than 1.5 feet when you're ready to pair the camera.Ensure that the Wi-fi signal strength on your phone is good. 1. Download the App (works only with iOS & Android devices) Please locate the SOLIOM+in your Google Play store or App store to download the soliom+ App. Tips:Please Allow below 2 permissions when use this App at first time. 1.
In-App Setup 2. Register an account Open the App and register your account with your email address. (1)Please set a password for your account and make note to remember it. (2)Please click "Allow" or "Agree" on all access when you download soliom+ and during the process of setting up your account so that the soliom+ can have full access to your camera and phone. otherwise, your camera may have less function or incomplete setups. 3.
In-App Setup 4. Turn on the camera Press the power button to turn on the camera, after 3 seconds, LED flashes blue. Then you will hear the following voice “The camera is now ready to begin pairing”. Micro-SD Power USB Port Reset Flashes blue How to turn off the camera? Press and hold on the “power” button for 5 seconds, after you hear music, LED will go off, which means the camera has been turned off.
In-App Setup 5. Pairing the camera with the App Please Note: connect your phone to the 2.4Ghz wifi firstly before you pair the camera, make sure your router password in mind before you start the pairing process. 1) Click "Add a device" and then choose "Setup device", click "Yes", when you hear the following voice “ The camera is now ready to begin pairing”. 2) When your phone or tablet connected well with your 2.
In-App Setup 3) Input the CORRECT WiFi password of your router, if you input a wrong password you will not be able to connect it successfully. Click the eye icon to double confirm the password you entered correct Your Wi-Fi name will be shown here automatically Click the icon to double confirm the password you entered correct Method 1: QR code configuration 1.
In-App Setup Method 2: Sound wave configuration 2.1 Enter into the “search device” page, make sure to turn up you phone’s volume to the Maximum, you will hear the following voice : “Pairing Information Received”. 3) You have connected the device to the App successfully. Choose a name of the devices from the drop-down choice, or you can modify one that you want. and then select the area where device is located.
In-App Setup 4) Congratulations! You have connected your camera to the App successfully, now you can live view the camera on your phone anytime and anywhere. If you're unable to pair the camera, Please check below suggestions: 1. Please reset the camera to default after you fully charged the camera. 2. Please turn up your phone volume to the maximum, if you pair up the camera through sound wave. 3. Please put the camera,phone as near as to your router (within 1.5 feet) to get a strong wifi signal strength.
In-App Setup 7.How to Share Your Camera with More Users When you can use your camera properly. You can start to share your camera to your friends or family members. click“ ”and choose "share permissions". input the account that you want to share with.
In-App Setup 8.How to unbind your camera Please do not forget to unbind your camera from your App when you plan to return the camera, to avoid any personal information disclosure risk.
In-App Setup Push Mode This icon indicate that the push mode is on, click it to turn off push mode and then you cannot receive any notifications. If you want to turn on or off the sound of notification, please refer to page 28. 2019-12-27 15:00:36 2019-12-27 15:00:36 Online Online Cloud storage The video clips will be saved in the Cloud. Cloud video length is 8 seconds defaulted and free for 30 days. And you have to pay for the service per month or other cloud service.
Physical Installation 1 Check your camera signal strength If not satisfied with video smoothness, and signal strength in App is not strong, we would suggest adding wifi extender between the Router and the camera. Check in App Camera WiFi extender 2 Recommended height to install the camera We suggest installing the camera about 8ft. You may adjust the camera angle physically according to the live view in your mobile. to focus your motion area to get the more accurate motion triggered events.
Physical Installation 3 Stick the position paper on the wall where you want to install the camera. drilling the 4 holes according to the 4 red dots on the paper and then fix the bracket using the expansion screws.
Technical Specifications Image Quality Resolution 1080P Specifications Lens Lens angle FOV 160° Video format H.264 Frames per second 15fps SD card support 8GB-Max 64GB Output Built-in speaker Intput Built-in microphone Video Specifications Audio Communications Battery Applicable Environment WiFi 2.4GHz Battery capacity 10000mAh Standby time Max 8-12 months Power consumption 6W(run)/ 0.
Technical Specifications System Suppport PIR Night Vision Working time for fully charged Waterproof Android 2.3 above/ iOS 7.
Detailed App Instructions 1.click , you could live viewing videos.
Detailed App Instructions Battery charging sign When camera exposed to sunlight,the battery will keep charging in green. During night or fully charged,the battery will stay white. Tips : If your battery sign will not show correct status as above,please remove the solar panel and then re install it to the camera body.Or contact Soliom support team for a replacement at care@soliom.net All friendly customer service staffs are ready to assist you.
Detailed App Instructions Setting: Click to enter into device settings. ( Check page 21 for more details) 2019-12-27 15:00:36 Online This icon “ ” is to turn on the spot light during night. The spot light will turn on to record a starlight color video clip when there's motion detected by the camera. You can click it to switch to infrared LEDS “ ” night vision mode to disable spot light.Camera will record motion in black and white video mode.
Detailed App Instructions SD Card Setting 1) Please turn on the cloud storage so that you can sync the camera time with your phone. 2019-12-27 15:00:36 Online Image flip You can choose Normal Rotate, Mirror or Mirror and rotate depends on your hardware installation way. The default is Normal.
Detailed App Instructions Scene mode You can choose to set it as Normal, back light compensation, night IR, High light compensation or Dynamic according to your actual light environment of installation place. 2019-12-27 15:00:36 Online PIR Detection Sensitivity You can set the PIR sensitivity as Disabled, Low, Medium or High. 1) When you set the PIR as Disabled, you will not record and receive any motion triggered events.
Detailed App Instructions 2019-12-27 15:00:36 Online Active time 1) This is the time you could set for the video length recorded to micro sd card. 2) Always: If you choose this option,you will not allow the camera enter into standby mode,the camera will keep recording all the time until battery drains out.
Detailed App Instructions LED indicator When you choose Enable,the Blue LED will light up to indicate when you operate the camera as it should be.When you choose Disabled,the Blue LED will not light up to indicate the operations or trigger motions.It is recommended to set it as the default 2019-12-27 15:00:36 Online Power frequency Please choose 60 or 50HZ according to your local frequency, It's defaulted to 60HZ for united states users.
Detailed App Instructions Device Name You can set a desired name for your camera.
How to save and delete videos 1. Videos can be saved in Cloud Storage: (1). The videos of PIR activity You could save the videos of PIR activities in cloud storage, which can be used 30 days for free and then you have to pay for the services. and the videos in the Cloud can be playback in the app. 2. Videos can be saved in the SD card: (1). The videos of PIR activity (2). The videos of live viewing You could playback these videos. 2019-12-27 15:00:36 Online 3.
More Settings Common Settings Click the common setting, you can choose the resolution to SD(720P) or HD(1080P) by clicking ”Default resolution”. You can turn on/off the notification alarm ring tone and vibration for Andriod devices,this is not workable for iOS devices currently. 2019-12-27 15:00:36 Online Frequently Asked Questions We summarize the frequently questions here, you can get your answers when pairing the camera or using the app.
R Customer Care Email: care@soliom.net www.soliom.net www.facebook.
