Manufacturer. Gin long Technologies Ce. Ltd. Bogging, Zhejiang, FR.China LIS Office: 565 Metro PL 8. Suite 3214, Dublin OH 43017, USA Toll-free: 566.438.8408 | Email | usssles@giniong. com Web: www.ginlong.com Please hardhats to tha actual products In case of any discrepancies in this user manual.
1. Introduction 3 1.1 Product Description 3 1.2 Packaging 4 2. Safely Instructions 5 2.1 Safety Symbols 5 2.2 General Safety Instructions 5 2.3 Notice For Use 8 3. Overview 7 3.1 Front Panel Display 7 3.2 LED Status Indicator Lights 7 3.3 Keypad 8 LCD 8 4. Installation a 4.1 Select Location for the Inverter g 4.2 Mounting the Inverter 11 4.3 Electrical Connections 14 4.3.1 Terminal Connections 18 4.3.2 Connect PV Side of Inverter 15 4.3.
1. Introduction 6.3 Settings 23 63.1 Set Time Acres oY Solis single phase US series inverters can transfer DC power from FV panels into AG 4 Advanced Info. wore and feed Into the grid. 6.4.1 Alarm Message 24 os single phase US roan inverters contain 7 models which ars listed below: 6.4.2 Running Message 25 Solis-1PEK-4G-US, Solis-KEPT-48-US, Solis-1PBK-4G-US, 6.4.3 Version 25 Solis-PIKE-4G-US, Solipsism-4G-US 6.4.4 Daily Energy 25 _Sleights 6.4.5 Monthly Energy and Yearly Energy 25 LED display 6.4.
1. introduction 2 Safety instructions 1.2 Packaging ‘When you receive the Inverter, ensure that all the parts listed below are Included: Bes SEs pi, pee Part $ Description Number 1 PY grid tls Inverter 1 2 Wall mounting bracket 1 3 Expansion screws 3 4 Locking sowers 1 5 Manual 1 & Table 1.1 Paris list improper use may result In potential electric shock hazards or burns. This manual contains important instructions that should be followed during installation snd maintenance.
WARMING: To reduce the risk of fire, over-currant protective devices (CPD) are required for circuits connected to the Inverter. The DC CPD shall be installed per local requirements. All photovoltaic source and output culture conductors shall have disconnects that comply with the NEC Article 680, Part Il. All Solis single pass inverters features an integrated DG switch. CAUTION: Risk of sleeveless shock. Do net remove cover. There [8 no user serviceable parts inside.
3. Overview 4. installation BIKE CLE There are four keys in the front panel of the Inverter(from left to right): ESC, UP, DOWN and ENTER keys. The keypad is used for: @ Scrolling through the displayed options {the UP and DOWN keys), @ Access to modify the adjustable settings (the ESC and ENTER keys). 3.
4. installation 4. installation @ [Install on a wall or strong structure capable of bearing the weight. ri YET nT @ Install vertically with a maximum incline the mounted inverter is toted to an Dimensions of mounting bracket: angle greater than the maximum noted, heat dissipation will be inhibited, and may result in power limiting. 2 8 @ When one or mots inverters ars installed in ons location, a minimum of 12 inches of Ho #0 clearance should be kept between sate Inverter or other objects.
4. installation 4. installation 4 Figure 4.5 inverter Pillar Mounting 2 Murmurer the bracket is horizontal and the mounting holes {in Figure 4.4 and Figure 4.5) are marked correctly. Drill the holes Into the wall of pillar af your marks. 3. Uss the suitable screws to fix the bracket fo the wall. 4 Figure 4.8 Wall Mount Bracket WARNING: 5. Uns screws to fix the bottom of the inverter to the mount bracket. The inverter must be mounted vertically. 4 .
4. installation 4. installation Le Eee sae Before marking wire connections, unscrew the four screws on both sides of the wiring box, then remove the cover. A Cross on the wiring box cover while loosening the screws. This action will help io avoid damaging the screw threads, & Flours 4,8 Bottom Side of Inverter Before making electrical connections, double check to ensure the steps below are strictly follows: a. Switch the Grid Supply Man Switch (AC) OFF, fb. Switch the DC Switch OFF. Please ses figure 4.
4. installation 4. installation industry temporary cable | 4,05.0 (Res PEEL | aq awE) A Table 4.1 DC cable size Damage to the DC disconnect dus fo enlarged knockouts. Enlarged knockouts enable moisture to penetrate the DC disconnect which could damage electronic components in the DG Disconnect. 4.0 (12AWG) Please refer to figure 4.8. The acceptable wire size range Is from 12 AWG to 8 AWG, copper conductors only; refer to local code for appropriate wire size.
4. installation 4. installation A Figured. 11 Connect the External Grounding Conductor Ere To protect the inverters AC grid connection conductors, Solis recommends installing breakers that will protect against over current. The following table defines GUPPY ratings for the Solis 6-10kW singles phase inverters.
5. Start & Stop 6 Operation 5.1 Start the Inverter To start up the inverter, 1 ls Important that the following steps ars strictly followed: 1. Switch the grid supply main Switch (AC) ON first, 2. Bobwhite the DG switch ON. If the voltage of PY arrays are higher than start up collage, the inverter will turn on. The red LED power will light. 3, When both the DC and the AC sides supply io the inverter, it will De ready to generate prows.
8 Operation 8 Operation Display Duration Description 10 se EDGAR: Shows input 01 voltages values. Shows input 01 current value. 1088 V_DO4: Shows Input 04 voltages value. i_DC4: Shows Input 04 current value. 108 Ingrid: Shows the grid's voltage value 8c grid: Shows the grid's current value. Sinus. Intimidating Status: Shows instant status of the Inverter, User 14800 10 s8c ; Power: Shows instant pulp power values, sins Grid: Shows the grid's frequency value. 10 see Total generated energy value.
8 Operation 8 Operation 6.4 Advanced Info Technicians Only NOTE: A This area is for fully qualified and accredited technicians only. Enter menu “Advanced Info.” and “Advanced settings” (need password) . Sal act "Advanced Info.” from the Main Menu. The scream will require the password as blow a Figure 6.5 Enter password The default password is "0010".
8 Operation 8 Operation Press the UP/DOWN keys to scroll through items. Press the ENTER key to audit the highlighted fem. Press the UP/DOWN keys again to sangs the selling. Press the ENTER key io save the selling. Press the ESC key to exit to save and send changes or cancel changes and return to the Advanced Settings Menu. IEEE This function Is used to start up or stop the power generation of Solis Single Phase inverter (see Figure 6.18). 4 Figure 6.
8 Operation 8 Operation This function 1a for maintenance personnel! only, rang operation will proven! the In verier from reaching maximum power. [11] 6.5.7.2 Protectorate Set A This function is for maintenance personnel only, wrong operation could disable inverter important function. IIE EEE This function is for malfeasance personal only, wrong operation could disable In verier important function, [11] 6.5.7.
8 Operation 8 Operation pie Pot FOURS eels Ly 1 He2 ves Va pi. 7 Hat supplicate 0.168 2 Hel | asacv
8 Operation 8 Operation 5. Re ac Power (Not Required) Descriptor Mote: This Setting is NOT required by Rule Standards. A This function is for maintenance personal only, wrong operation will prevent the Inverter from reaching maximum power. §.
8 Operation 8 Operation [1 1} 6.5.8.3 Freq Aerate Set This setting Is applicable when UL Standards are selected. There are five frequency aerate mods In this menu when grid standard [s selected. Modes 00 — 03 are disabled. Mods 04 is used for UL 1741 SA frequency destining settings. Within this mods the user can sel the frequency start and stop points, The default setting Is 88( disabled). & Figures 8,38 Freq Aerate Set 100% of Available Power Grid Frequency min tom start {stop max 4 Figure 6.
8 Operation 8 Operation BIE EET This setting is sad to control real power based on the frequency excursion This setting is applicable when Ruler Standards are selected, & Figure 8.42 Reg-Watt {1} Start Freq: This Is the frequency that active power reduction starts, Gradient: This Is the active prows reduction rats In terms of the frequency. Top Freq: Thai ls the frequency that stops the correction oval.
8 Operation 7. Maintenance IEE Tha function is used for update the DSP, A This function is for maintenance personnel only, rang operation will prevent ihe inverter from reaching maximum power. EEE This setting Is for export power control. Please don't change settings In this item. A This setting is used for update Inverter with export power control accessory. Please don't change setting In this menu. 6.
Troubleshooting 8 Troubleshooting Alarms Louse Solution Wo Information {Blank Bearer) «Input voltage low/missing « Polarity reversed + Mari board damaged Tat DE switch OFF « Hack PV connections » Check polarity « Hack valiant »120V Single, 350V the Test DC Switch OH » Check voltage =120V Single, >350V thees «11D voltage Is "0" replace inverter Initializing {inverter stick in this mads} « Inverter Is waling for driving signal Test DE switch OFF « Hack PV connections » Check polarity « Hack valiant >120V Sing
Troubleshooting 8 Troubleshooting Grid unsinkable Instability, Internal fault currant high Alarms Cause Solution East + Measure DC and AC voltages OVERBUYS: DE : BUS voltage lp | *Interior detects High + Compare with LCD fos vine GY on internal bus « Replace inverter io « Internal damage + Lira cams loose during shipping East .
