Manufacturer: Gin long (Bogging) Technologies Co. Lid., Beginning, Zhejiang, PR.China LIS Office: 565 Metro PL 8. Suite 3214, Dublin OH 43017, USA Toll-free: 566.438.8408 | Email | usssles@giniong. com Web: www.ginlong.com | Please record the serial number of your inverter sad quote this when you contact us. @.
1. introduction Bee aeu Ne eA VEE Serrano ESR aN AER RAS BEY Aa ae baa OES 1.1 Product Description 1.2 Packaging 2. Safely Instructions 2.1 Safety Symbols 2.2 General Safety Instructions 2.3 Notice For Use 3. Overview 3.1 Front Panel Display 3.2 LED Status Indicator Lights 3.3 Keypad LCD 4. Installation 4.1 Select Location for the Inverter 4.2 Mounting the Inverter... 4.3 Electrical Connections 4.3.1 Terminal Connections 4.3.2 Connect PV Side of Inverter 4.3.3 Connect Grid Side of inverter 4.3.
1. Introduction 6.3 Settings 23 63.1 Set Time 2 6.3.2 Set Address 23 Solis single phase US series inverters can transfer DC power from FV pansies into AG 6.4 Advanced Info. 24 power and fads Into grid. 6.4.1 Alarm Message 24 Solis single phase US series inverters contain 7 models which ars listed below: 6.4.2 Running Message 25 Solis-1PEK-4G-US, Solis-KEPT-48-US, Solis-1PBK-4G-US, . Solis-PIKE-4G-US, Solipsism-4G-US 65.4.3 Version 25 6.4.4 Daily Energy 25 6.4.5 Monthly Energy and Yearly Energy 25 6.4.
1. introduction 2 Safety instructions 1.2 Packaging ‘When you receive the Inverter, ensure that all the parts listed below are Included: Part $ Description Number 1 PY grid tls Inverter 1 2 Wall mounting bracket 1 3 Expansion screws 3 4 Locking sowers 1 5 Manual 1 & Table 1.1 Paris list improper use may result In potential electric shock hazards or burns. This manual contains important instructions that should be followed during installation snd maintenance.
WARMING: To reduce the risk of fire, over-currant protective devices (CPD) are required for circuits connected to the Inverter. The DC CPD shall be installed per local requirements. All photovoltaic source and output culture conductors shall have disconnects that comply with the NEC Article 680, Part Il. All Solis single pass inverters features an integrated DG switch. CAUTION: Risk of sleeveless shock. Do net remove cover. There [8 no user serviceable parts inside.
3. Overview 4. Installation 3.3 Keypad 4.1 Select a Location for the Inverter There are four keys in the front panel of the Inverter(from left to right): To select a location for the inverter, the following criteria should be considered: ESC, UP, DOWN and ENTER keys. The keypad is used for: @ Do not install in small closed spaces whets air can not circulate freely.
4. Installation 4. Installation @ [Install on a wall or strong structure capable of bearing the weight. @ Install vertically with a maximum incline the mounted inverter is toted to an angle greater than the maximum noted, heat dissipation will be inhibited, and may result Dimensions of mounting bracket: in less than expected output power. When one or more inverters are installed in one location, a minimum 12 inches clearance should bs kept between sate Inverter or other objects.
4. installation 4. installation 4 Figure 4.5 inverter Pillar Mounting 2 Murmurer the bracket is horizontal and the mounting holes {in Figure 4.4 and Figure 4.5) are marked correctly. Drill the holes Into the wall of pillar af your marks. 3. Uss the suitable screws to fix the bracket fo the wall. 4 Figure 4.8 Wall Mount Bracket WARNING: 5. Uns screws to fix the bottom of the inverter to the mount bracket. The inverter must be mounted vertically. 4 .
4. installation 4. installation Le Eee sae Before marking wire connections, unscrew the four screws on both sides of the wiring box, then remove the cover Press on the wiring box cover while loosening the screws. This action will help to avoid damaging the sower threads, | gil Surprise A Figure 4.8 Bottom Side of Inverter Before making electrical connections, double check to ensure the steps below are strictly followed: a. With the Grid Supply Main Switch (AG) OFF. b. Switch the DC Switch OFF.
4. installation 4. installation industry temporary cable | 4,05.0 (Res PEEL | aq awE) A Table 4.1 DC cable size Damage to the DC Disconnect dus to enlarged knockouts. Enlarged knockouts enable moisture to penetrate the DC Disconnect which could damage electronic components in the DG Disconnect. 4.0 (12AWG) Please refer to figure 4.8. The acceptable wire size range Is from 12 AWG to 8 AWG, copper conductors only; refer to local code for appropriate wire size.
5. Start & Stop 6 Operation 5.1 Start the Inverter To start up the inverter, 1 ls Important that the following steps ars strictly followed: 1. Switch the grid supply main Switch (AC) ON first, 2. Bobwhite the DG switch ON. If the voltage of PY arrays are higher than start up collage, the inverter will turn on. The red LED power will light. 3, When both the DC and the AC sides supply io the inverter, it will De ready to generate prows.
8 Operation 8 Operation Display Duration Description 10 se EDGAR: Shows input 01 voltages values. Shows input 01 current value. 1088 V_DO4: Shows Input 02 voltages value. i_DC4: Shows Input 02 current value. 108 Ingrid: Shows the grid's voltage value 8c grid: Shows the grid's current value. Sirius BRIDE Impetus: Shows cantata status of he inverts, User 14880 10 s8c . Power: Shows instant out power values, sins Grid: Shows the grid's frequency value. 10 see Total generated energy value.
8 Operation 8 Operation 6.4 Advanced Info Technicians Only NOTE: A To access to this area is for fully qualified and accredited technicians only. Enter menu “Advanced Info.” and “Advanced settings” (need password) . Sal act "Advanced Info.” from the Main Menu. The scream will require the password as blow a Figure 6.5 Enter password The default password is "0010".
8 Operation 8 Operation Press the UP/DOWN keys to scroll through items. Press the ENTER key to audit the highlighted fem. Press the UP/DOWN keys again to sangs the selling. Press the ENTER key to save the sealing. Tress the ESC key to cancel changes and returns io the previous menu. IEEE This function Is used to start up or stop the power generation of Solis Single Phase inverter (see Figure 6.18). 4 Figure 6.18 Set Grid ON/OFF Screens can be scrolled manually by pressing the UP/DOWN keys.
8 Operation 8 Operation A This function 1a applicable by maintenance personal only, wrong operation will proven! the In verier from reaching maximum power. [11] 6.5.7.2 Protectorate Set A This function Is applicable by maintenance personnel ably, wrong operation could disable inverter important function. IIE EEE This function is applicable by maintenance personnel only, wrong operation could disable In verier important function, [11] 6.5.7.
8 Operation 8 Operation pas | fe HELLFIRE ivi vagus RARE i Bol Applicator 5.483 2 Hel | 28i
8 Operation 8 Operation [1 1} 6.5.8.3 Freq Aerate Set There gre § desiderata mods in this menu when select UL-208 or UL-240 in grid standard, inverter the mods disabled. Mode 04 is used for UL17413A frequency destining smelting. This could set the f start and slop point. The default salting ls 30, means this function bs disabled. A Flours 8.30 Freq Dealer Set 100% of | : Ava liable ' ' Forward Grid Frequency o | | fin fom fa tart atop fax & Figures 8.
8 Operation 7. Maintenance EET This function is used for calibrate inverter output energy. i will not impact the energy count for Inverter with RGM. The screen shows: 4 Figure §.34 Power Rate Limit Press the Down key to move the cursor. Press the Up key to change the digit. Fleas press ihe inter to save the selling and pass the ESC key fo return to ihe previous menu. A This setting is used for grid operator, don't change setting under this manual. 6.
Troubleshooting 8 Troubleshooting Alarms Louse Solution Wo Information {Blank Bearer) «Input voltage low/missing « Polarity reversed + Mari board damaged Tat DE switch OFF « Hack PV connections » Check polarity « Hack valiant »120V Single, 350V the Test DC Switch OH » Check voltage =120V Single, >350V thees «11D voltage Is "0" replace inverter Initializing {inverter stick in this mads} « Inverter Is waling for driving signal Test DE switch OFF « Hack PV connections » Check polarity « Hack valiant >120V Sing
Troubleshooting 8 Troubleshooting Alarms ad Solution GRID-INT: Grid unstable = Inverter detects grid Instability, Internal fault current high Tout With DC Switch OFF + Ensure AL voltage «Test AC ins tor THD « East ~ With DC Switch ON Fast AG Tina for THD « Multiple Inverters/ tur ene off + Impedance matching adjustment or box + Maintain damage «Wire cams loss In shipping FAULTINESS: initialization Protection + boaster and Slave DSP have different values Asst inverter DC swhioh OFF = Wait und all lighted fur
9. Specifications g. Specifications Power aerating due to Input voltages sangs. Po war darting dus to ambiance temperatures condition (Fer all e-10kW models}: P/V curve for P(%) A Power(W) 100% 7600 — Full load under test condition 3000 60% | 100 253 500 580800 Voltage(V) P/V curve for Solis-1P10K-4G-US 0 » T(TF Power) 113 140 ) Full load under test. condition 4000 | 100 200 500 580800 Voltage(V) Comments: Hers will be DC over voltage alarm when DC Input voltage between 580600V.
