H: Contact If any technical problems, please contact us, with he following information in hand: 4 Device model 4 Serial number of product Gin long Technological Co. Lid. Mao, 57 Jingoist Road, Inhalant Industrial Park Sinkiang, Bogging, Zhejiang, 315712, P.R.China Tel: +88 (0)574 6578 18086 Fax: +86 {0)574 6578 1508 Email: Web: www.ginlong.com Pitiless record the serial Buber of your monitor and quote this when you contact us. £ 3500s GARS Box Quick Guide Data Logging Box GARS GL-G01 Version: 1.
Data Logging Box GARS is an textual data logger in the Solis monitoring series. Data Logging Box GARS can collect information of Upwind system by GARS communication through RS486/422 interface with convenient 'plug and play' function. With the integrated function, the kit can connect to router and transmit data to the web server, realizing remote monitoring for users.
11. Interface and connection Power asap < iM card soot SIM card ejection button RS486/422 S SN solar numbs B: Install data logger GARS Box can be either wall-mounted or flat wise. Antenna port C: Connect data logger and inverters Nat ice: Power supply of inverters must be cut off before connection. Make sure that all connections are completed, then power the data logger and inverters, otherwise personal Injury or equipment damage may be caused. I.
11. Connection with multiple inverters 1. Parallel connect multiple inverters with 485 cables. 2. Connect all Inverters to data logger with 485 cables. 3. Set different address for each inverter. For example, when connecting three inverters, the address of first inverter must be set as "01", the second must be set as "02", and the third must be set as "03" and so on. 4. Connect data logger to power supply with power adapter.
Step: Fill in the content as required and click on the register again. 2: Scan tha code APP only supports the scanning of the bar code/QR code of data loggers. If there data logger, you can click the "no device” and jump to the next step: input plant information. 3: Input plant information The system automatically locates the location of the station via the mobile phone GPS. If you are not in the site, you can also click "map" to select on the map.
4: Enter the name of the station and the owner's contact number The name of the station is suggested to use your name, and the contact number is recommended to use your mobile phone number so as to have the installer operation in the later period. G: Debug |.
Conn action to remote server galled Please contact your device customer service. Ill. Reset Press the reset button with a needle or pen paper clip and held for a while when the 4 LED should be the same as before. Reset is successful when 3 LED, except POWER, turn off.
