Mole 1X means uncertain status. Mote 2 When screw or adjust the antenna, please note that only the metal part can be touched, and do not screw the plastic part, otherwise the antenna may be damaged. Note 3 | the equipment still falls fo work upon above solutions, please contact your device customer service, H:Contact If any technical problems, please contact us, with the following information In hand: @ Device model @ Serial number of product Ginseng Technologies Co. Lid. Ma.
Data Logging Box WiFi is an textual data logger in the Gin long monitoring series. By connecting with single or multiple inverters through RS485/422 interface, the Kit can collect information of PV wind systems from inverters. With the integrated WiFi function, the Kit can connect to router and transmit data fo the web server, realizing remote monitoring for users. In addition, Ethernet is also available for connection to router, enabling transmission of data.
2. Interface and connection C:Connect data logger and Inverters Notice: Power supply of inverters must be cut off before connection. LED fa i i Make sure halt ail connections are completed, then power the data : logger and inverters, otherwise personal injury or equipment damage may be caused. Antenna port S/N serial number Bi install data logger WiFi Box can be either wall-mounted or flat wise. Connect inverter and data logger with 485 cable, and connect data logger and power supply with power adapter.
2. Connection with multiple Inverters Dr Network setting WiFi Box can transfer information via either WiFi or Ethernet, users may choose the appropriate method accordingly. I. Connection via WIFI ! Notice: The setting hereinafter is operated with Window XP ] for reference only. If other operating systems are used, i please follow the corresponding procedures. 1. Prepare a computer or device, e.g. tablet PC and smartphone, that enables WiFi. 2.
@ Select wireless network of the data logging module, no passwords required as default. The network name consists of AP and the serial number of the product. Then dick Connect. Chose a windless etas eae Efren a oem @ Connection successful. Chops a wireless network FH Sie AOC in Notice: If AF {serial number of product) is not available in the wireless network list, there may be problems in the connection or setting of data logging . Please refer fo 5. Debug of User Manual for troubleshooting. 4.
@ Click Wizard to start. @ Select Wireless connection, and click Next. ee Abusive ion Co St Wise Gable Ancient air aka pate Pasta Rose Advanced Aes psa Rasta Asst ine FER @ Click Refresh to search available wireless networks, or add it manually. @ Click Start to continue.
@® If setting is successful, the following page will display. Click (# to restart. Satin compile iin Setting salience Peale ices his gate menial What Notice: After setting is completed, if STATUS is permanently on after about 30 seconds. and the 4 LED are all on after 2-5 minutes, the connection is successful. If STATUS is flashing, which means unconstitutional connection, please repeat the settling from step 3. I.Connection via Ethernet 1. Connect router and data logger via Theme port with network cable .
4. Set parameters of data logger @ Click Start to continue. In the configuration interface of data logger, you can view general information of the device. sar er. Follow the setup wizard to start quick setting. Wienie @ Click Wizard to start. Devi Information. i @ Select Cable Connection, and you can choose to enable or disable the wireless function, then click Next.
@ Select Enable to obtain an IP address automatically, then click fad. Pane Hi he Tooting Tania ® If setting is successful, the following page will display. Click to restart. ® If restart is successful, the following page will display. Sabin telecommute Pelvis chose is nae manuscript Iran Wii able Radiance Count Lat Font an Reset .
Step: Phone scanning and sending QR code to download registration APP . 0 Or search Solis Coma or Solis Pro in the App Store and Google Play Store End user, owner use Installer, distributor use Step: Click to register. Step: Fill in the content as required and click on the register again. Rg 1: In the absence of login, click "1 minute to create the power station" in the center of the screen. Click in the upper right corner to create the power station.
4: Enter the name of the station and the yawner's contact number The name of the station Is suggested to use your name, and the contact number Is recommended to use your mobile phone number so as to have the installer operation I. LED indication in the later period. G: Trouble shootings Sans Manning Power supply is normal © POWER off Power supply Is subnormal sr on Connection between data logger and Inverter Is normal & 1s A521 Hash Dina is transmitting between data foggier and inverter.
Il. Trouble shooting Power off No power supply Connection with Inverter fs an normal UNK flash ‘Wireless In STA mode Data logger works No abnormally Data logger works Status off abnormally WIT signal strength week ‘Connect power supply and ensurers good contact. Check the Witt aid repairer tha th fn order comply with TEE Ensure the stability of RIS. Ensure normal working status of Inverter No network. Please set network first. Please ‘configure internet connection according to Quick Guide.
