Ginlong_LAN Stick Quick User Guide-ver1.3

ManualsBrandsSolis Inverters ManualsSolar & Wind PowerData Logging Stick

Data Logger LAN Stick

Quick User Guide

DLS Version: 1.3

DeliveryContent

1 pc Data Logger LAN Stick Quick User Guide

1 pc LAN Stick

Data Logger LAN Stick Interface

Data Logger LAN Stick Installation

NOTES

Connect LAN Stick to the corresponding interface on

the inverter. Solis-1P5K-4G is used as an example in

this manual. Please perform relevant operations as

indicated below:

1. Insert LAN Stick to COM port.

2. Fasten the LAN Stick.

LAN Stick automatically obtains IP by default.

If the network cable supports automatically obtains

IP, please jump to “ ” for APP registration.

If network cable do not support obtains IP

automatically , please continue to follow “ ” for IP

settings.

Description of Symbols

Introduction

Wireless RouterData Logger

LAN Stick

Data Logger LAN Stick is mainly used in inverters to

realize simple and quick access to Internet. Users

can easily check device information by logging in the

monitoring center. The communication topology is as

shown below:

a. The connected wireless router can normally

access to Internet;

b. The communication address of the inverter

MUST BE " ", which is default value. 01

c. A computer is connected to this device for

parameter setting.

To ensure normal use of the datalogger, before

using the datalogger, be sure that:

Corresponding groove

Electrical Connection

iPhoneAndroid

LAN configuration

Step 1: Enter in the web browser, 169.254.173.207

open the following configuration interface. (If you

can’t open it, please skip to )3

Enter username and password . admin admin

Step 2: Select the “ ”. Quick Set

Enter IP address、Subnet mask、Gateway address、

DNS server address for network cable. Then click the

“ ” .(Please enter in the “ ”, Save 1 Network name

otherwise it cannot be saved)

Step 3: The following interface pops up to indicate that

the setting is successful, please skip to .Otherwise 4

please try LAN configuration again.

Create plant

Build Your Plant Within 1 Minute!

Step 2: Enter the SN of the datalogger.

The datalogger SN can be automatically scanned by

placing the purchased device bar code in the scan

box. If you can't scan, you can also manually enter the

datalogger SN (just enter the digital serial number).

Step 1：In the APP homepage and click “Build Your

Plant Within 1 Minute!” in the middle of the screen.

Or click the “ ” in the upper right corner.+

Distrubutor/Installer create plant

Solis

In order to easy registration and easy manage, you

can also let the distributor/installer register the plant,

then Link it to you.

Click the [ ] and tell the “ ” to your ID

Distrubutor/installer to build the plant for you.

(Note: your Distrubutor/installer must have a Solis

Pro account)

Link distributor/installer

Step 1: In order to easy manage to your plant.

Select the plant and enter . Click the " " Intro installer

or " " .distributor

Disconnected Installer

Disconnected Distributor

Step 2: Enter the company name of the installer or

distributor. Then click the “ ”.Search

Search Distributor Name

Step 3: Click the [ ] and the Bind Distributor/Installer

plant will appear in your installer/distributor

monitoring interface.

(Note: your installer/distributor must have a Solis Pro

account to appear in the search list)

Bind Distributor

Contact

If you have any technical questions about our

products, please contact us.Before contacting us,

please confirm the following items:

Equipment model

Serial number of the datalogger

Problem description

Screenshot of the Status page in the

configuration interface

Ginlong Technologies Co., Ltd.

No. 57 Jintong Road, Binhai Industrial Park,

Xiangshan, Ningbo, Zhejiang, 315712, P.R.China.

Tel: +86 (0)574 6578 1806

Fax: +86 (0)574 6578 1606

Email：info@ginlong.com

Web：www.ginlong.com

Step 3:Enter the plant information.Then click the

" ".Next

Step 4:Enter the plant name and contact information

of the plant owner. Then click the “ ”.Done

Note: Please scan the SN number on the datalogger,

not the SN number on the inverter.

√ ×

Create Solis monitoring account

Solis Home

For End User

Solis Pro

For Distributer/Installer

Step 1: Mobile phone scan the QR code to download

the APP, or in the APP Store or Google Play search

Solis Home or Solis Pro.

Step 2: Click on the “ ”.Register

Step 3: Fill in the form as required and click

the“ ”.Register

LAN configuration

Step 1: With a network cable to connect the computer

and LAN Stick, right-click the computer icon in the

lower right corner of the computer, enter the network

and sharing center.

Step 2: Select the local connection options.

Step 3: Left double-click " " into the "Properties local

connection status".

Step 4: Left double-click: "Internet Protocol version 4

(TCP / Ipv4).

Internet Protocol V ersion 4(TCP/IPv4)

Step 5: While the computer's IP is configured as a

static IP (as shown below).

Step 6: Enter 10.10.100.254 in the web browser,

open the following configuration interface. Select the

“ ”.Network

Step 7: Enter IP address、Subnet mask、Default

gateway、Preferred DNS server and Optional DNS

server for network cable. Then click the “ ” and Save

“ ” to restart the LAN Stick.Restart

Summary of content (1 pages)

PAGE 1
Introduction 1 Electrical Connection Data Logger LAN Stick is mainly used in inverters to realize simple and quick access to Internet. Users can easily check device information by logging in the monitoring center. The communication topology is as shown below: Connect LAN Stick to the corresponding interface on the inverter. Solis-1P5K-4G is used as an example in this manual. Please perform relevant operations as indicated below: 2 LAN configuration 3 LAN configuration Step 1: Enter 169.254.173.