QuickGuide_Solis-RSD(1-2)L-1G_V1_2
Table Of Contents
RSD quick installation manual
1. Packaging
Part #
1
Description
Rapid Shutdown Device
2
AC Terminal Assembly
3
Manual
Number
1
2
1
RSD is designed to mount on the rack under PV modules, please follow below steps:
Attaching RSD to rack① Fix the screws②
④Ground connection③Connect DC input connectors junction box
32
2016 , Ningb o Ginlo ng Techno logie s Co., Lt d.
C
Sol is-RS D-1G( 1:1)
Ins talla tion an d Operat ion Man ual
PV Rapid Shutdown device
Ver 1.2
Sol is-RS D-1G( 2:2)
1
2. Installation
3. Connect grid power of RSD
Some of Solis 2G series inverter is not designed to match RSD, so there are two pin
terminal in RSD accessory, installer may need to replace the L1 and L2 terminal of
the inverter to the 2 pin connector.
Raise the root side of the L1 and L2 terminal to replace the L1 and L2 terminal
Raise the root side
of the L1 and L2 terminal
RSD grid connection
GENERAL
Rated AC Input Current
Rated Frequency
AC Control Wire Size
Ambient Temperature Range
Rated AC Input Voltage
DC Input Voltage Range
Maximum Number of PV Source Circuits
Maximum Short Circuit Current
DC Input / Output Cable Whips
DC Input / Output Wire Size
Maximum Input / Output Current
Enclosure Type
DC
Maximum Input and Output Voltage
Ground Wire Size
AC
Maximum AC Fuse Rating
PV Wire with MC4 Locking Connectors
208/240VAC
0.1A
-25 to +65°C (-13 to 158°F)
30-600VDC
AWG #12 to #6
600VDC
2 or 3 input / 2 output
20A
31.2A
AWG #10 to #6
50/60Hz
AWG #18 to #10
2A
NEMA 4X
Solis-RSD1L-1G
4. Specification
Solis-RSD2L-1G
1 or 2 input / 1 output
20A+10A
Please see detail in the installation and operation
manual