User Manual

102
CLEANING AND MAINTENANCE
Switch off the appliance with the ON/OFF-switch (press twice) and pull the
power plug from the socket. Remove the power cord from the appliance.
Wait until all parts have cooled down before removing the cooking bowl. Clean
the cooking bowl, the steaming tray and the condensed water tank with warm
dishwater and carefully wash and dry everything. The cooking bowl and stea-
ming tray must be cleaned after every use for hygienic reasons.
Solis recommend not washing any accessory parts, except the steaming tray, in
the dishwasher, as the overly aggressive dish detergent as well as hot water tem-
peratures might damage the surfaces of the cooking bowl or deform other parts.
The inside of the lid should be cleaned with a moist cloth and then be dried. This
also applies to the rubber lining around the lid. Always let lid and rubber lining
dry completely before closing the lid again.
Generally, do not use aggressive or abrasive detergents or steel sponges to clean
the accessory parts and the appliance itself, as they might damage the surface.
The appliance should only be wiped with a moist cloth and then be dried. Do
not use any alkaline detergents but only ever soft wipes and mild detergent.
The condensed water tank should be remounted to the appliance after cleaning.
Note:
In case rice got stuck to the bottom of the cooking bowl, fill the cooking bowl
with hot water, add a dash of mild detergent and let the cooking bowl stand for
10 minutes. Afterwards, you should be able to easily clean it.
Warning:
The connection adapter has to be removed from the appliance jack before
cleaning the Rice Cooker Duo Program. The appliance jack has to be comple-
tely dry in any case before restarting the appliance.
To prevent the surface of the appliance and accessory parts, never use alkaline
detergents but only ever soft wipe and a mild detergent.
Never use chemical agents, steel sponges, steel wool or scouring milk for
cleaning the appliance and accessory parts, as they might damage surfaces and
coatings.
Never immerse the appliance or the power cord in water or other liquids, as this
might lead to electric shock.