Bedienungsanleitung Mode d’ emploi Istruzioni per l’uso Operating Instructions 2 2 – 23 24 – 45 46 – 67 68 – 89
Operating Instructions SOLIS MASTER TOP PLEASE OBSERVE THE SAFETY INSTRUCTIONS. Table of contents: Dear Customer, Congratulations on acquiring this new SOLIS MASTER TOP FULLY AUTOMATIC ESPRESSO MACHINE, a Swiss quality product. Please read these instructions carefully and follow them. By doing so, you and your guests will truly enjoy your SOLIS MASTER TOP. Please keep these instructions in a safe place. If you are not sure about anything or would like more information, please ask your local dealer or us.
SOLIS MASTER TOP Operating Instructions Legend: 1 2 3 13 8 9 2 15 10 10a 4 11 14 16 3 7 4 5 6 7 8 9 10 10a 11 12 13 14 15 16 17 18 17 18 6 5 Removable water container Warming plate for cups Swiveling steam and hot-water nozzle with cappuccino nozzle Hot-water/steam knob Cup tray Removable drip tray with fill-level indicator Removable container for waste coffee Bean-container with cover Funnel for ground coffee with cover Grinding adjustment Indicator for grinding adjustment Main switch O–I B
Operating Instructions SOLIS MASTER TOP 10 11 12 9 13 14 1a 1b 1 2 8 15 70 7 6 5 4 3
Operating Instructions Open panel cover, so that all keys and LEDs are visible.
Operating Instructions SOLIS MASTER TOP Do not immerse the appliance in water and do not use the appliance with wet hands. 1.0 Safety instructions Children do not understand how dangerous electrical appliances can be. For that reason, children should never be allowed around electrical appliances without supervision. The appliance should not be left switched on without supervision.
SOLIS MASTER TOP Operating Instructions Be careful when touching the steam nozzle as it becomes hot when in use (danger of scalding). 2.0 General comments Do not operate the appliance without water. Before cleaning the appliance, always remove the mains plug. Do not allow the cord to come into contact with hot parts of the appliance. The appliance is intended for the preparation of coffee, hot water and steam and must not be used for any other purpose.
Operating Instructions SOLIS MASTER TOP 3.0 Starting up / Before using for the first time 3.1 Fill the water container with cold water (max. 2.4 liters). Insert it in the appliance from the front and press home firmly so that the valve at the back opens. Note: Use only fresh cold water to fill the container. Do not use mineral water, milk or any other liquid. 3.4 Turn the main switch O–I ON. The appliance is now switched on but in the stand-by mode. 3.5 Press the operating switch .
SOLIS MASTER TOP Operating Instructions 3.8 The appliance is ready to operate only when the green temperature indicator is lit. Note: When operating the appliance an automatic rinsing of the brewing unit takes place. The rinsing operation takes place whenever the appliance is switched on from cold. During the rinsing operation (indicated with the control indicator (14), the appliance cannot make coffee. 3.9 Press selector key 2 and the first coffee will be produced.
Operating Instructions SOLIS MASTER TOP 5.0 Making coffee with ground coffee (2nd type of coffee) Remove the cover from the ground coffee funnel and place max. 1 or 2 level measuring spoons of ground coffee (for 1 or 2 cups) in the funnel (only use the measuring spoon supplied with the appliance). 5.1 Press the selector key ground coffee (4). (The yellow control indicator (11) will be lit). 5.
SOLIS MASTER TOP Operating Instructions 7.0 Making steam For heating milk and cappuccino or other drinks. It is assumed that the appliance is ready to operate in accordance with point 3.0 Starting up, i.e. the reservoir is filled with water and the temperature indicator shows green. Note: With the SOLIS MASTER TOP you can obtain steam at the same time as making coffee. This is possible thanks to a separate heating system for steam. 7.
Operating Instructions SOLIS MASTER TOP 8.0 Programming Your SOLIS MASTER TOP is pre-programmed at the factory for ideal results. However, you have the possibility to program the unit according to your individual preferences. 8.2 Programming of coffee quantity for the selector keys 2, 8 and 9. The strength of the coffee is determined by the amount of coffee used and this depends on the duration of grinding. For every selector key you can freely program the quantity of coffee to be used. 8.
SOLIS MASTER TOP Operating Instructions d) Adjust the desired coffee quantity with the +/- quantity selector key. b) The desired temperature can now be adjusted with the +/- keys, whereby 6 represents the maximum and 1 the minimum temperature. e) By pressing the programming key the selected coffee quantity is programmed. The coffee quantity is now programmed until you change it by re-programming the unit.
Operating Instructions SOLIS MASTER TOP 9.0 Special programming functions 9.1 Pre-brewing function. The standard factory settings include the pre-brewing function for the products 1 espresso, 2 espressos and one café crème which allows optimum use of the ground coffee. However you have the option of switching this function off for the mentioned selector keys. For the pot of coffee product, pre-brewing can be included if required. (Note: For the product 2 café crèmes, pre-brewing cannot be included.) 9.
SOLIS MASTER TOP Operating Instructions d) By pressing the programming key the new value is programmed. , The new stand-by time is now programmed until you change it by re-programming the unit. Note: For safety and energy-saving reasons we recommend that, after switching to standby (final rinse is made), the appliance be switched off at the main switch over-night and during absences. For short absences, the appliance can be switched to the stand-by mode with the operating key .
Operating Instructions SOLIS MASTER TOP Using the multi- tool setting head you can adjust the grinder to the desired position. The actual position is indicated on the display: Position 1 = fine/turn clockwise Position 6 = coarse/turn anti-clockwise The grinder is pre-set by the factory to position 3–4, which means an average fineness. Important: The position of the grinder may only be adjusted when the grinder is running. 11.
SOLIS MASTER TOP Operating Instructions 12.2 Cleaning the coffee delivery system The coffee delivery system can be removed for cleaning. Use hot water and, if required, a non-scouring detergent. Under normal conditions, monthly cleaning is recommended. 1. Unplug the appliance at the mains supply. 12.3 Cleaning the grinder Normally, the grinder cleans itself. It is sufficient to remove residues from the container with the brush supplied.
Operating Instructions SOLIS MASTER TOP b) Manual cleaning of the brewing unit. At least once or twice a month, at the latest when the indicator flashes (after 250 operations) the brewing unit should be cleaned as follows: 4. Clean residue from the brewing unit with the brush supplied and thoroughly rinse in running warm water. Leave to dry completely. Do not clean in the dishwasher! 1. Switch appliance into stand-by mode and wait until the final rinse is finished and the red LED is on. 5.
SOLIS MASTER TOP Operating Instructions Important: If the control indicator flashes after switching on the appliance, the brewing unit is not properly inserted or the door is not properly closed. 2. Press the cleaning key (3) for at least 4 seconds until the cleaning program starts. The cleaning program will now proceed automatically and is shown by the indicator . Do not interrupt the cleaning process! 12.5 Cleaning program (indicator flashes).
Operating Instructions SOLIS MASTER TOP Note: If the brewing unit cannot be properly reinserted, it has probably been unintentionally moved during cleaning. In this case, please adjust with the builtin lever. Please proceed as follows: 13.0 Decalcifying (control indicator flashes). At the latest after 1325 operations the indicator will flash and indicates that decalcifying is required. Even though you may continue to make coffee, it is recommended to decalcify the unit as soon as possible. 2.
SOLIS MASTER TOP Operating Instructions 5. Press the decalcifying selector key (6) for at least 5 seconds until the decalcifying process starts. The decalcifying program will run automatically. Please do not interrupt the decalcifying program! During the decalcifying program the indicator will be lit. 6. When the insufficient water and decalcifying indicators flash, thoroughly rinse the water tank, refill with fresh water and replace. 7. Now press the decalcifying key again.
Operating Instructions SOLIS MASTER TOP Note: It is quite normal for the pump to occasionally start up automatically during operation. It automatically fills the system with water. 5. Coffee has no foam – Unsuitable coffee blend is used or coffee is no longer fresh. – The coffee quantity selected is insufficient. – Cups are too cold. Pre-warm. – The correct operating temperature has not been reached. – The temperature is too low. Re-program the temperature. – The grinding is too coarse.
SOLIS MASTER TOP Operating Instructions Recommended position: 3-4 as originally adjusted by the factory Important: the grinder position may only be adjusted while the grinder is running. CAFE SOLIS coffee blends: a variety of exclusive blends specially selected for espresso machines. They guarantee good coffee. – Coffee tastes best when you use pre-warmed cups. Please see point 11.0. 17.
SOLIS-Gesellschaften und Kundendienstzentralen: Sociétés et centres de service après-vente SOLIS: Società e centri di servizio clientela SOLIS: SOLIS Subsidiaries and Service Centres: Schweiz / Suisse / Svizzera / Switzerland Deutschland /Allemagne / Germania / Germany SOLIS AG Solis-Haus 8152 Glattbrugg-Zürich SOLIS DEUTSCHLAND GmbH Am Krebsgraben 18 78048 VS-Villingen Tel. 01/ 810 18 18 Fax 01/ 810 30 70 E-Mail: info@solis.ch Internet: www.solis.ch Tel.
