Operation Manual

1716
Operating your SOLIS Prestige Kettle
Before first use
Remove any promotional materials and packaging
materials before use. It is recommended that before
the
first use the kettle is filled to the maximum level,
boiled
and water discarded. Your kettle will only
oper
ate when positioned on the power base with the
On/Off
switch in the On position. The kettle will
autom
atically switch off once the water has boiled.
Operation of your kettle
1. To fill the kettle, remove it from the power base
and
open the lid by pressing the lid release button.
Fill with the desired amount of water. Always fill
the
kettle between the minimum and maximum
marks
on the water window. Too little water will
result
in the kettle switching off before the water
has
boiled.
2. Ensure that the lid is locked firmly into place.
Place
the kettle firmly onto the power base. Plug
the
power cord into 230V power point.
3. Press the On/Off switch to the ‘On’ position.
The power ‘On’ light and the water guage will
illumin
ate.
Note
Al
ways fill the kettle between the minimum
(Min)
and the maximum (Max) marks on the
exterior
of the kettle. Too little water will result
in
the kettle switching ‘Off’ before the water
has
boiled. Filling above the maximum mark on
the
exterior of the kettle may result in boiling
water splashing from the kettle.
Know your SOLIS Prestige Kettle
Note
This
kettle must only be used with the power
base
supplied. Use caution when pouring water
from your kettle, as boiling water will scald. Do
not
pour the water too quickly.
The kettle will automatically switch ‘Off’ once the
water has boiled. Lift the kettle from the power base
and
pour the water. Take care to hold the kettle level,
especially
when filled to the maximum level. To
re-boil
it may be necessary to wait for a few seconds
to
allow the control to reset.
The
kettle may be stored on its power base when not
in
use. Unplugged the appliance from the power
when
not in use.
Safety boil dry protection
The kettle is fitted with a safety device, which
protects
against overheating should the appliance be
oper
ated with insufficient water. If this occurs the
kettle
will stop heating. Switch ‘Off’ at the power
point
and allow kettle to cool before refilling. The
safety
device will automatically reset when the kettle
has
cooled down.
For additional safety your kettle is fitted with an
additional
thermal cut out. In the event of
overhe
ating, the kettle will automatically shut down
to
prevent further damage. Should this occur, take
your
kettle to an authorised SOLIS Service Centre.
THIS APPLIANCE IS DESIGNED FOR THE BOILING OF DRINKING QUALITY WATER ONLY, NEVER USE IT
TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. THE LID SHOULD ALWAYS BE FIRMLY IN
PL
ACE AND LOCKED CLOSED BEFORE USE.
Removable scale filter
Filters out scale deposits for
cleaner water and prolongs
element life
Premium
quality
brushed
stainless
steel
1.6 litre capacity
Fast boil 2200 watt
concealed
element
Multi
directional power
base
with cord storage
Easy to open lid
Viewing window in top of kettle
Soft
grip handle
Illumin
ated
water gauge
Illumin
ated power
‘on’
light
On/Off
switch
Safety
auto
cut out and
boil
dry protection
BDA_Solis_Wasserkoche#478E3.qxd 9.1.2006 12:01 Uhr Seite 16