Operation Manual

39
Tips for preparing food
Always add the liquid ingredients to the blender first, if it is not specified otherwise in the recipe.
Cut solid food (vegetables, fruit, cheese, cooked meat, fish, and seafood) into pieces of about 2cm in size. Do
not overload the motor with too hard or too large ingredients. If the motor stalls, switch the blender to “0”
(middle position; OFF) to prevent overheating.
(See faultfinding help on page 12.)
Process the ingredients for only a few seconds. It is better to check the consistency of the contents from time to
time, rather than obtaining too fine, possibly mushy contents.
With the two speeds and the PULSE setting, you can prepare different ingredients easily,variedly, and quickly.
Select the speed setting
Simply set the On/Off switch to the required speed setting 1 or 2 (see the following table).The most suitable
speed is determined by the consistency of the ingredients.
You can operate the PULSE button in the switch position “0” (middle position; OFF).The motor runs for as long
as the PULSE button is pressed. On releasing the PULSE button the motor stops. You can then press the PULSE
button again. Note:the PULSE button only functions when the On/Off switch is in the “0”position.
Speed Switch position Function; Examples Used for
Pulse operation 0 + PULSE Crushing ice; Crush ice cubes: place 8–10 ice
button Beating butter/margarine cubes in the blenderor fill the jug
and press PULSE several times until
the pieces of ice are the required
size.
Slow 1 Mashing: Cook the food, leave to cool, place
Preparing baby food in the blender with sufficient liquid.
Beat until fluffy; Add sugar or flavoring according to
For whipped cream taste.
Mixing; First add the liquid,then the other
For cream soups ingredients.
Fast 2 Whisking; Add fresh fruit with yogurt, cream
For fruit dishes or sour milk.
Making drinks; Cut the fresh fruit into 2 cm large
For juices/purée pieces and put in the jug.
from fresh fruit
BDA_Blender_Mixer_DE_FR_E.qxd 25.08.2004 16:25 Uhr Seite 39