Operation Manual

22 23
OPERATION INSTRUCTION
• Connect the power supply with the product: First connect the power cord into a power outlet with the
correct voltage. Ensure that the device is located on an even and stable surface.
• When standby, only the switch can be used. Press to turn on the heater, press it again to turn off.
The acquiescent condition after power on is:
 Power: low power working, two heat indicator lights go on.
 Timing: 00h (no timing), Led-H is off.
 Temperature: Digital control displays the real-time room temperature.
 Temperature setting: Automatically set to 25°C.
• When power on, press to circularly switch
Low power  Middle power  High power.
 Low power: two heating degree indicator lights go on.
 Middle power: four heating degree indicator lights go on.
 High power: six heating degree indicator lights go on.
CLEANING AND MAINTENANCE
• Ensure that the device is switched off before cleaning or maintenance – the main switch is in the
position „0“ and the power cord is pulled out of the power socket. Before cleaning the device,
allow it to cool down.
• Wipe the surface of the device using a clean and dry wipe. Do not use cleaning products causing
scratching, petrol or other solvents. Do not submerge in water or in any other liquid.
• Never use thinner, toluene, acidic lotion, kerosene, alcohol and chemical rag to clean the machine,
so as not to metamorphose or change color.
• After cleaning, plug in to make sure the machine can work normally, and then pull out the plug and
pacing the device according to the packing order.
• The machine should be put in a place with low humidity and good ventilation.
WARNING:
ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.
AVOID CONTACT OF THE HEATER WITH WATER OR WITH ANY OTHER LIQUID.
• When power on, press to set timer from 00h to 23h.
• Under the condition of time setting, press again, you can set temperature.
The displaying screen will show the ambient temperature.
• Remote control: the function of remote control is the same with the main machine.
Tow lights go on Four lights go on Six lights go on
General Switch Control Panel Control Panel
of the Heater of the Remote
Power Indicator
Light
Timing/
Temperature
Display
Power Indicator
Solis_ComfortHeater_Betriebsanleitung.indd 22-23 19.05.10 07:54