Installation Instructions



24

WIFI BOX Quick Guide
Note 1：Please check the status of these 4 LEDS 5 minutes later after the data logger is powered on.
Note 2： When screw or adjust the antenna, please note that only the metal part can be touched, and do
not screw the plastic part, otherwise the antenna may be damaged.
Note 3： If the equipment still fails to work upon above solutions, please contact your device customer
service.
III. Reset
Press the reset button with a needle or open paper clip and hold for a while when the 4 LEDs should be on. Reset is
successful when 3 LEDs, except POWER, turn off.
H：Contact
If any technical problems, please contact us, with the following information in hand:
 Device model
 Serial number of data logger
 Number of inverters connected
 Problem description
 Screen shot of Status page