Installation Guide

WWW.SOLISTONE.COM
cement-based adhesive is generally suitable on masonry substrates where no movement is
anticipated. Where slight movement could occur through thermal or pedestrian loads, a modified
cement adhesive should be used as a minimum. A 1/4” – 1/8” notch trowel is recommended for
most applications. Set the tile in place gently tapping it in with a grout float to ensure 100%
adhesive coverage.
GROUTING
Select the type of grout you use based on the width of the desired joint. Sanded grout is
generally recommended for any grout joint larger than 1/8”. Grouts are ordinarily a water mix
but where some flexibility may be needed, a latex additive or similar product should be used.
SEALANTS
The porcelain tiles do not have to be sealed but we strongly recommend sealing the grout after
installation to help prevent it from absorbing stains.
CARE & CLEANING
Terrene porcelain mosaics must be regularly cleaned and maintained to extend the life and
beauty of the installation. The tiles can be cleaned with a neutral mild detergent or glass cleaner.
Any spills should be cleaned quickly to lessen the degree of the stain to the grout. Do not use
abrasive cleaners, powders, scouring pads, steel wool or sandpaper.