Installation Guide

WWW.SOLISTONE.COM

INFORMATION & GUIDELINES FOR THE INSTALLATION OF MODERN TILES

RECOMMENDED INSTALLATION

Add dimension to walls with SOLISTONE Modern tiles. A natural split-faced stone, each 12”x12”

mesh backed interlocking tile displays an exquisite texture for three-dimensional design, inside

and out. Feature walls, fireplaces, backsplashes, bathrooms and bedrooms are just some of the

unique places to apply the Modern Collection.

Because these tiles are made from natural stone, it is not unusual to find occasional flaws, veining,

or variations of color within the tile. This variation is considered to be a desired feature in the

product and adds to the three- dimensional look.

NOTE: this document contains only guidelines for the installation process. A professional installer

should always be consulted to discuss the specific parameters surrounding your project.

CURVED SURFACES

As the individual pieces are tightly formed and firmly affixed to the mesh backing, SOLISTONE

Modern mosaics are not recommended for installation around gently curved surfaces.

SUBSTRATES

All substrates should be firmly fixed, flat, clean, dry and free of contaminants such as dust, oil,

paint, sealers etc. to ensure proper adhesion. Painted surfaces must be scuffed or sanded for the

product and adhesive to bond correctly. Wet areas need special attention and require

appropriate substrates, e.g. concrete, cement boards (compressed sheet), and/or treated

plywood. The use of reinforced waterproof membranes is suggested.

WATERPROOF MEMBRANES

Waterproof membranes prevent leakage of water through to the sub-floor framing and/or

habitable spaces below. Particular attention must be paid to: carrying the membrane up the wall,

outside shower boxes, installation of bond breakers, and sealing around penetrations. It is

strongly recommended that membrane systems be used in all wet areas. Some systems may

involve the use of a primer.

CUTTING

Cuts can be done with either a wet saw or a hand grinder using a diamond or masonry blade.

PAGE 1
INFORMATION & GUIDELINES FOR THE INSTALLATION OF MODERN TILES RECOMMENDED INSTALLATION Add dimension to walls with SOLISTONE Modern tiles. A natural split-faced stone, each 12”x12” mesh backed interlocking tile displays an exquisite texture for three-dimensional design, inside and out. Feature walls, fireplaces, backsplashes, bathrooms and bedrooms are just some of the unique places to apply the Modern Collection.
PAGE 2
ADHESIVE Follow the adhesive manufacturer’s instructions carefully. We do not recommend one brand of adhesive over another. Please check with your local tile supply store for alternative and comparable products. The manufacturer's literature will explain if the adhesive product is suitable for interiors and/or exteriors, as well as walls and floors. Most thinset mortars (multi purpose and polymer modified thinsets) are adequate for installing stone tile.