User's Manual

ManualsBrandsSolo USA ManualsCar Video SystemSolo USA Car Video System 1163220

SOLO

™ Quick Reference Guide 1 Part No 1163220

NAVIGATING THE SOLO

™ LCD SCREEN

QUICK REFERENCE GUIDE

NOTE:Thisguideismeanttobeusedonlyasabrief,general

reference.Forcompleteoperatinginstructions,alwaysrefer

totheOperator’sManual.

Turning Concentrator On/Off

NOTE:Forthisprocedure,refertoFIGURE1.1.

1. ToturntheSOLO

concentratoron,pressandholdthe

On/Offbuttonuntilthethreewarninglightsdisplay

andtheunitbeeps.

2. ToturntheSOLO

concentratoroff,pressandholdthe

On/Offbutton .

NOTE:GREENlightwillflashandyouwillhearthemachinestop

running.

FIGURE 1.1 Turning Concentrator On/Off

Menu Screens Navigation

NOTE:Forthisprocedure,refertoFIGURE1.1.

1. Afterturningonunit,pressandholdtheMode/Return/

HighlightButton toscrollthroughthethreeSOLO



concentratormenuscreens.

NOTE:ScreenswillcontinuescrollinguntiltheMode/Return/

HighlightButtonisreleased.

Normal Operating/Standby Screen

TheNormalOperating/Standbyscreenshowseitherbattery

strengthgauge,fanoperating,externalpoweronandbattery

chargingicons,whenapplicable,orthecurrent/lastmodeof

operationandoutputflowlevelselected.

On/Off

Button

Mode/Return/

Highlight Button

Summary of content (4 pages)

PAGE 1
NAVIGATING THE SOLO2™ LCD SCREEN QUICK REFERENCE GUIDE NOTE: This guide is meant to be used only as a brief, general reference. For complete operating instructions, always refer to the Operator’s Manual. Turning Concentrator On/Off NOTE: For this procedure, refer to FIGURE 1.1. 1. To turn the SOLO2 concentrator on, press and hold the On/Off button until the three warning lights display and the unit beeps. 2. To turn the SOLO2 concentrator off, press and hold the On/Off button .
PAGE 2
LCD Adjust Screen The LCD Adjust screen allows user to change the brightness and contrast of the screen (FIGURE 1.2). Up/Increase Button Mode/Return/ Highlight Button Down/Decrease Button FIGURE 1.2 LCD Adjust Screen LCD Adjust Screen Navigation NOTE: For this procedure, refer to FIGURE 1.2. 1. Perform one of the following, while the LCD Adjust screen is displayed: A. Tap the Mode/Return/Highlight Button to move the black highlight bar from left to right, or right to left. B.
PAGE 3
2. To save changes made on the LCD Adjust screen: A. Press and hold the Mode/Return/Highlight Button until a different screen appears. Mode & Flow Adjust Screen The Mode & Flow Adjust screen allows user to change the current mode of operation and output flow (FIGURE 1.3). NOTE: To adjust either the mode or flow, the Mode & Flow Adjust screen must be displayed.
PAGE 4
Adjusting Flow NOTE: For this procedure, refer to FIGURE 1.3. 1. With the Mode & Flow screen displayed, press and hold the Up/Increase Button or Down/Decrease Button until desired setting is achieved. 2. Wait until the Mode & Flow screen flashes three times. Invacare Corporation www.invacare.com USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Technical Services 800-832-4707 © 2010 Invacare Corporation. All rights reserved.