Product Manual

OPERATING FEATURES:

Nozzles - Your Solo sprayer is supplied with nozzle arrangements to provide a variety of spray patterns.

Item Application Part #

Flat spray nozzle Row treatment 4074263

Jet stream nozzle Spot & longer range 4074755

Jet stream nozzle and Shrubs and bushes 4074755

Swirl plate = hollow cone 4074756

Plastic adjustable Spot, shrubs & bushes 4900527

nozzle

SPRAY TIP ASSEMBLY

1. Flat spray nozzle

2. Filter

3. Jet cap

4. Swirl plate

5. Nozzle cap

6. Nozzle body

7. Brass adj. nozzle*

8. Nozzle retaining nut

*Brass adjustable nozzle is not a standard item on all Solo sprayers.

Spray tips should be assembled as above for desired spray pattern.

SPRAYING:

Prime the pump with rapid pump strokes. When you feel very firm resistance, the pressure chamber is filling with

liquid. With repeated piston strokes, the air in the pressure chamber is slowly compressed. In a safe area, point

the wand upward and press the shut-off valve lever spraying for 10 seconds or until no air and only liquid is com-

ing out. This will bleed all of the air out of the hose and wand. By pressing the hand lever, the valve opens, and

liquid is forced through the nozzle. The shut-off valve has a retaining clip which keeps the valve in the “OPEN” posi-

tion for continuous operation. Pump using the end of the pump handle, as it is less fatiguing. The volume of liquid

delivered varies with the working pressure which should be as high as needed to ensure an adequate spray pattern for

each individual application.

NOTE: Should the pressure drop very quickly, drain the tank completely and pump without liquid. By this procedure, the air

chamber is refilled with the required volume of air. It is advisable to pump the tank completely empty from time to time.

Flat spray Hollow

cone spray

Brass

adjustable

nozzle*

Jet stream Plastic

adjustable

nozzle