Operation Manual

CE Declaration of conformity; For USA only: ECW Statement / Manufacturers Warranty Coverage
ENGLISH 45
E
N
G
12. CE Declaration of conformity
In accordance with EG Directives 98/37/EC, 2000/14/EC and RL - 2004 - 108 EC,
SOLO Kleinmotoren GmbH, Stuttgarter Strasse 41, D-71069 Sindelfingen, being solely responsible,
states that the product referred to in this declaration complies with the requirements of the Machinery
Directive.
Description of product: chain saw
Model/type description: 644 651 / 65SP / 651H 656 / 656SP / 656H
Sound power level
(EN ISO 3744, Guaranteed sound 116 116 116 dB(A)
EN ISO 22868) Actual sound 114 115 115 dB(A)
Applied standards: DIN EN ISO 11681, DIN EN 14982
Conformity assessment procedures (2000/14/EG) ! Appendix V
Nominated location acc. to 98/37/EC : Intertek Deutschland GmbH
Nikolaus-Otto-Str. 13
D 70771 Leinfelden-Echterdingen
Registration number. 0905
Storage location for the technical documentation
according to 2000/14/EC and 89/336/EC: Solo Kleinmotoren GmbH
Stuttgarterstr. 41
D-71069 Sindelfingen
Serial number, Build year ! Type plate
This declaration of conformity loses its validity, if the equipment is converted or modified without the
manufacturer's consent.
Sindelfingen, 1
st
August 2007
SOLO Kleinmotoren GmbH Wolfgang Emmerich
Executive Director
13. For USA only: ECW Statement / Manufacturers Warranty Coverage
For USA only
Emissions Control Warranty Statement
The Environmental Protection Agency and Solo are pleased to explain the emission control system on
your small non-road power equipment engine. In the US new small non- road engines must be
designed, built, and equipped to meet the Environmental Protection Agency's standards. Solo must
warrant the emission control system on your small non- road engine for the period of time listed below
provided there has been no abuse, neglect, or improper maintenance of your small non-road engine.
Your emission control system includes parts such as the carburetor, the ignition system, and the
exhaust system.
Where a warrantable condition exists, Solo will repair your small non-road power equipment engine at
no cost to you including diagnosis, parts, and labor.
Manufacturers Warranty Coverage
Solo's small non-road power equipment engines are warranted for a period of two years. If any
emission control related part on your engine is defective, the part will be repaired or replaced by Solo.
Contact Information for Authorized Service Center Locations, Replacement Parts,
Warranty and Technical Information
Warranty repairs must be completed by a SOLO Authorized Service Center.
SOLO USA, Inc. 1-800-765-6462
5100 Chestnut Avenu [e-mail]
Newport News, VA 23605