Operation Manual

Safety regulations - When working with the saw
ENGLISH 11
E
N
G
- Never touch the ground with the chainsaw while it is running.
- Do not use the saw to prise off or scoop away pieces of wood or other objects.
- Longitudinal cuts should be made at as flat an angle as possible. Special care is required here,
as the bumper spikes cannot engage.
- Be careful when cutting wood which has splintered, as sawn off pieces of wood can be torn off
and fly off at high speeds (risk of injury).
• Switch the engine off if you notice any significant changes in the behaviour of the power tool.
• Never touch the silencer while it is still hot – risk of burns. Never set down the hot power tool in
dried grass or on other flammable objects. The silencer gives off extremely large amounts of heat
(fire hazard).
• Never work with a defective silencer or without a silencer. You risk damaging your hearing and
burning yourself on the device.
First Aid
A first aid box should always be available on-site. Immediately replace any materials you have used:
Note:
Over exposing persons with circulatory problems to vibrations can lead to damage to their nervous
system or blood vessels. The following systems may occur from vibrations to fingers, hands or the
wrists: Numbness, itching, pain, twinges, changes to the colour of the skin or the skin itself. Seek
medical advice if you experience any of these symptoms.