Operation Manual

Your SOLO chainsaw - Standard delivery;- Designation of important controls and functional parts

ENGLISH 12

3. Your SOLO chainsaw

3.1 Standard delivery

• Chainsaw – basic unit (without guide bar and saw chain)

• Depending on the selected version, possibly the guide rail, saw chain, chain guard

• Models 644, 651SP, 651 ,651H and 656SP: sprocket 0.325’’ – 7, preassembled

• Models 656 and 656H: sprocket 0.325’’ - 7 and sprocket 3/8’’ – 7, not preassembled

• Tool: Combination tool (spark plug spanner with screwdriver), plus additional screwdriver

• These Operating Instructions

3.2 Designation of important controls and functional parts

View: profile from the right

Mod. 656

1*. Saw chain 15. Chain brake release spring

2*. Guide bar 16. Cowl fastening clips

3. Hand protection 17. Starter handle

4. Front handle 18. Stop switch

5. Cowl 19. Fuel tank cap

6. Rear handle 20. Chain lubrication oil tank cap

7. Choke 21. Primer

8. Part throttle control pin

Not always standard, depending on the version

22a*. Decompression valve on top

22b*. Decompression valve on the side

9*. Grip heating switch

(models 651H / 656H only)

23. Side cover

Pre-filter area - Printed:: "PRE-FILTER"

10. Throttle control lock 24. Idling stop screw T

11. Throttle control 25. Carburettor adjusting screws (H / L)

(for use by a specialist workshop only)

12. Retaining nuts for the rail cover 26. Bumper spikes

13a*. Chain tensioning bolt on the side

13b*. Chain tensioning bolt in front

27. Exhaust

14*. Chain guard plate 28. Adjusting screw, chain lubrication oil quantity

* depending on the version