User's Guide

Brama S-C / S-A1 User Guide
© Interlink-U, 2021 Page 9 of 26
Powering on the Brama Device:
Figure 9: Power your Brama Device On
When your Brama Device is on, it registers with the cellular network and is ready to communicate to
the Alarm Receiving Centre/Monitoring Center.
Power Off Brama Devices:
Press and hold the button shown to
power the device on.
You will feel a single vibration.
The LCD on the your device will show
the startup splash-screen as the
device begins to boot up.
Once completed, the home screen
will be displayed. Typically, this
sequence should take no longer than
60 seconds.
Press and hold the button as shown
(for 2 seconds) to power off the
device.
You will feel two vibrations.