User's Manual

AIRGO_USER_MANUAL_EN_VERSION_2_200423
ENGLISH USER MANUAL
AirGo’s LED shows in red color during charging and blue color after fully
charged. AirGo will be automatically power o when it is under charging.
Plug USB connector of the charging cable to USB charger or laptop.

Double tap on the frame to enable voice assistant of your phone (iOS or Android).
After your double tap, you will hear the Voice assistant beep tone. You can start the
voice command.
AirGo will power o automatically if it is not put on for 3 minutes.
To power o AirGo, long press multi-function button for 3 seconds until “Power
O” voice prompt is heard, and its LED will turn o.
To power on AirGo, long press multi-function button for 2 seconds until Power
Status voice prompt is heard, and it’s LED flashes in blue color . AirGo will reconnect
to last paired phone automatically.
Turn on Bluetooth connectivity of your phone and put AirGo right next to your
Phone
Long press multi-function button for 5 seconds to power on AirGo until its LED flashes
in red/blue color and “Pairing” voice prompt is heard.
Voice Assistant
Double tap on the frame again to end voice assistant.
x2
x2
Phone Call
To accept a phone call , short press multi-function button or slide backwards on
right temple.
To reject a phone call , long press multi-function button for 1 second or slide
forwards on right temple.
To end a phone call , short press multi-function button.
x1
x1
1s
80 mm
80 mm
Cover P. 1 P. 2 P. 3 P. 4 P. 5 P. 6
Back Cover P. 7 P. 8 P. 9 P.10 P.11 P.12
AirGo™
Bluetooth Pairing
Open Bluetooth settings on your phone and select “Solos AirGo”
AirGo’s LED will flash in blue color only after it is paired to your phone. It is ready for
call and music now. AirGo can be paired up to 8 devices
solos AirGo
5s
Volume Control
Touch Sensing – Up & Down
Tap
Single Tap – Music Play/Pause
Double Tap – Voice Assistant
Multi-Function Button
Long Press – Paring, Power On/O, Reject Call
Single Press – On/O Call, Next Song
Double Press – Previous Song
Temple Lock
Press to Release Temple
Operation Summary
To decrease volume level , slide forward on right temple during phone call or
listen to music.
To increase volume level , slide backward on right temple during phone call or
listen to music.
Volume Control
Each slide backward or slide forward will adjust one step of the volume level.
Mobile App
AirGo mobile app uses AirGo smart glasses to provide AI Care , AI Coach and many other
features.
AI Care takes care of your health with providing wellbeing features such as posture
monitoring, posture/stretching exercise, personal reminders (drink water), etc.
AI Coach calculates and coaches your jogging activities.
AirGo mobile app is available for both iOS and Android.
LED Lighting Mode
2s
1s
FAST
OFF
Blue color flashing in every 2 s
Blue color flashing in every 1 s
Red/Blue color flashing
Red/Blue color flashing fast
Red color
Blue color
Power o / AirGo is put on
Waiting for Bluetooth connection
to a phone
Bluetooth connected
to a phone
Pairing
Receive incoming phone call
Charging
Fully Charged
FCC Statement:
This device complies with part 15 of the FCC rules Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
RF Exposure Information and Statement :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Warning: Any changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the device.
FCC compliance statement
United States: Federal Communications Commission [FCC]
Solos Technology Limited
Unit 211, 2/F Photonics Centre, No. 2 Science Park East
Avenue, Hong Kong Science Park, Shatin, N.T Hong Kong
Tel: [phone]
Website: www.solos.com.hk
Crop
Fold
FRONT
BACK
Power On/O
“POWER
HIGH/OK/LOW”
ON
ON
Before power on, please confirm that the left and right temples are attached to the
AirGo glasses frame.
OFF
“POWER OFF” /
OFF
OFF
Music Control
To play music , single tap on the frame
To pause music , single tap on the frame
When playing music, short press on multi-function button to play next track
When playing music, short press on multi-function button TWICE consecutively to play
previous track
x1
x1
x2
Phone Call (Call Waiting)
To accept the 2nd incoming phone call, short press multi-function button.
Current call will be ended.
To reject the 2nd incoming phone call, long press multi-function button for
1 second.
1s
x1
Charging
Connect pogo pins connector of the charging cable to AirGo charging port.
When disconnect pogo pins connector from AirGo, AirGo will power on and reconnect
to last paired phone automatically.
If you experience any problem or with the operation of Solos products, please seek either
support from our website (www.solos.com.hk) or email to our customer service at
[e-mail].
Customer Care
Model: Argon