Manual

100
Multi-4JALL+/PCI VA2
2. When not setting the RS422/RS485 Slew-Rate Limit
521 6
ON
3 4
Initial condition used when opposing RS422/RS485 transceiver does not have the
Slew-Rate Limit function. When the Slew-Rate Limit function is not selected maximum
communication speed is 921.6Kbps. (Max chip speed: 16Mbps)
- Configuration of the Terminal Resistor’s DIP SW
1. When setting RS422 Terminal resistor
5321
ON
4 6
2. When setting RS485 Terminal resistor
2
ON
643 51