Serial/IP® Redirector User Manual Version 1.
Serial/IP® Redirector User Manual History Modified Date Mar. 21. 2014 Version 1.0 Pages All Description Written by W. Lee Copyright (C) SystemBase Co., Ltd. All Rights Reserved. Website http://www.sysbas.com/ Phone +82-2-855-0501 Fax +82-2-855-0580 16F Daerung Post Tower-1, 228, Digital-ro, Guro-gu, Seoul, Republic of Korea For any inquiries, please visit our technical support website at http://www.solvline.
Serial/IP® Redirector User Manual Contents Index Chapter 1. 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Introduction ................................................................................................................ 2 Configuration .............................................................................................................. 2 Control Panel..............................................................................................................
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector Chapter 1. Serial/IP® Redirector 1.1 Introduction The device servers by SystemBase includes Serial/IP® Redirector by Tactical Software. The Serial/IP allows the users to add virtual COM ports in a PC, communicating SerialGate with TCP/IP using the RFC-2217 telnet protocol. In order to use with the SerialGate, Serial/IP must be set to client mode while telnet (RFC-2217) mode in the SerialGate.
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector 1.3 Control Panel Configuration of COM00 (00 may be replaced with associated port number) : IP address and TCP port number of SerialGate device server that should be connected by Serial/IP.
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector 1.4 Adding or Removing Virtual COM Ports Adding or removing virtual COM ports are very simple. Click ‘Select Ports’ button on Serial/IP Control Panel, this will show the ‘Select Ports’ window. From this window, if you mark any check boxes that you wish to use to virtual COM ports, it will be added as virtual COM ports. If you unmark check boxes which is already marked, it will be removed from virtual COM ports.
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector 1.5 Activity To check the status of each virtual COM ports, double click the Serial/IP icon from the tray icon. TD/RD: When data transmit/receive the corresponding icons will blink. TR/DR/CD: ON/OFF signal line status can be checked. Status: Status with the devices can be checked.
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector 1.6 Trace Trace of the data is enabled after “Enable Trace” is checked. Enable Trace: starts tracing data. Hex Display: Shows in hexadecimal value. Auto Scroll: Automatically scrolls. Always On Top: Displays this windows on top of other windows.
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector 1.7 Advanced Settings Displays advanced settings for the Serial/IP Redirector. Extend Server Connection by xx ms: This option causes the redirector to extend its connection to the server (and access to the device) for a designated interval that begins when the virtual COM port is closed by the application.
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector Control protocol, the redirector can use a keep-alive message method to detect a failed connection to the server. This option controls the interval at which the redirector will issue the keep-alive message, if no activity has occurred on the connection.
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector 1.8 Proxy Server Configure proxy server settings. The Serial/IP Redirector supports TCP network connections made through a proxy server, which may be controlling access to external networks (such as the Internet) from a private network that lacks transparent IP-based routing, such as NAT. Proxy server support is built into the Serial/IP Redirector because it is a driver that runs in kernel mode.
Serial/IP® Redirector User Manual Chapter 1. Serial/IP® Redirector 1.9 Configuration on SerialGate To use the SerialGate with the Serial IP, the operation mode of serial settings on SerialGate should be set to Telnet (RFC-2217).
Serial/IP® Redirector User Manual Chapter 2. Installation Chapter 2. Installation 2.1 Install Guide Insert the installation CD into the CD-ROM drive Run “SystembaseNNN.exe” if it does not start automatically. (Replace NNN with the numbers which represents the version number of the software.) Serial/IP installer starts and provides installation details. Click “Next” to continue.
Serial/IP® Redirector User Manual Chapter 2. Installation Next, in license confirmation window, after reading the End User License Agreement, if you agree, click ‘I accept the license agreement’ and click “Next” button. Click “Next” button.
Serial/IP® Redirector User Manual Chapter 2. Installation Click “Next” button. Click “Next” to start the installation.
Serial/IP® Redirector User Manual Chapter 2. Installation Click “Finish” to complete the installation.
Serial/IP® Redirector User Manual Chapter 2. Installation 2.2 Uninstall Guide Insert the installation CD into the CD-ROM drive Run “SystembaseNNN.exe” if it does not start automatically. (Replace NNN with the numbers which represents the version number of the software.) In the window below, select “Remove” and click “Next” to remove Serial/IP.
Serial/IP® Redirector User Manual Chapter 2. Installation Click “Next” button. Click “Finish” to complete uninstallation process.
