Installation Manual

14 Revision 00b-DRAFT August 23, 2006
Macro Base Station Installation Procedures (NPM-2500)
Fuses
Each radio module contains one 2A, 250V, fast-blowing fuse (1.25 × 0.25 inch) to protect the RF
components from damage in the event of an electrical overload.
Rack Grounds
Table 2.7 shows the grounding requirements for each rack.
Ground Type Requirement
Chassis ground TBD
Radio module ground TBD
Isolation pad (recommended) The rack must be installed on an isolation pad to ensure proper grounding.
Table 2.7 Grounding Requirements