User's Manual
Table Of Contents
- Important safety instructions
- Regulatory Notices
- Contents
- Introduction
- Installing the SOMAport
- An overview of the installation
- Unpacking the SOMAport
- Choosing the best location for the SOMAport
- Connecting a computer via Ethernet
- Connecting a computer via USB
- Connecting multiple computers to the SOMAport
- Connecting telephones to the SOMAport
- Connecting the power supply and powering on the SOMAport
- Testing your equipment
- Configuring network settings for Ethernet connections
- Activating full service
- SOMAport Lights
- Troubleshooting and Getting Help
- Index
47
SOMAport Lights
Signal strength indicator lights
The signal strength indicator is made up of four lights. They are on the front of
the SOMAport, below the Status light.
Signal strength indicator light states
During SOMAport startup, the four lights that make up the signal strength
indicator remain off until a radio channel has been acquired.
When one or more of the lights is solidly lit, the SOMAport has locked in a radio
signal and is ready to use. The more lights that are lit, the stronger the signal. For
example, when all four lights are lit, the signal is optimized. If only one light is lit,
the signal is weak, however, the SOMAport can still operate normally.
00094
Signal Strength
Indicator Lights