Installation Guide

ManualsBrandsSomerset Collection ManualsBathroomSomerset Bright White 1-Tier Bathroom Shelf

Flatback

Bath Accessories

Installation, Use & Care

Instructions

Thank you for your purchase, please enjoy your

new Bath Accessory. These products are

designed for easy installations over new or

existing shower walls. They complement any

ceramic, porcelain, metal or stone tile.

Q-Seal™ Permanent Protection

Accessory surfaces are protected by Q-Seal, a

permanent sealer that is water and stain

resistant, protects against abrasion, and is

antimicrobial which inhibits the growth of stain

and odor-causing mold and mildew. Q-Seal is

factory-applied and never needs re-sealing.

Installation Instructions

Our bath accessories are designed for easy no

cut installations over existing shower walls.

They complement any ceramic, porcelain, metal

and stone tile.

• Prior to installation, clean surface with

alcohol

• Locate position at desired height for install

and mark it (use grout line when available)

• Use double sided tape provided and place

on the 4 specified areas on the back of

accessory – remove paper tabs before

install

• If your shower isn’t square add tape to fill

gaps included

• Following adhesive manufacturer’s

instructions, apply adhesive along guideline

on back edges of accessory

• Press and hold accessory into place

• After adhesive is cured, apply caulk to seal

Approved Substrates

•

Marble, ceramic, glass, fiberglass reinforced

wall panels and unpainted drywall

Setting Materials

Adhesive sold separately

Please use either:

1. POLYURETHANE CONSTRUCTION

ADHESIVE

• Loctite PL Premium Polyurethane Tan

Construction Adhesive

(Lowes Item #: 100575)

• Loctite PL Premium Polyurethane Fast

Grab Adhesive (Lowes Item #: 388026)

• Sika Pro Select

• Liquid Nails Polyurethane

• Titebond Fast Set Polyurethane

2. 2-PART EPOXY GEL / PASTE ADHESIVE

• Devcon 0.85 oz 5 Minute Epoxy Gel

(Lowe Item #: 74434)

• Loctite Epoxy Gel

• Laticrete Latapoxy 310 Stone Adhesive

• Mapei Kerapoxy Adhesive

• Custom Building EBM-Lite Premium

Epoxy Bonding Mortar

Care and Maintenance

• Clean with ordinary household cleaner. We

recommend a liquid, non-abrasive cleaner

• Do NOT clean with abrasive implements

(scouring pads or steel wool) as surface

damage may result

• Cleaners containing ammonia, bleach, or

other harsh chemicals should be wiped up

shortly after application as surface damage

may result

WARRANTY

Q-Seal is guaranteed to be water and stain

resistant for as long as you own your home.

Summary of content (2 pages)

PAGE 1
Installation Instructions Our bath accessories are designed for easy no cut installations over existing shower walls. They complement any ceramic, porcelain, metal and stone tile. Flatback Bath Accessories Installation, Use & Care Instructions Thank you for your purchase, please enjoy your new Bath Accessory. These products are designed for easy installations over new or existing shower walls. They complement any ceramic, porcelain, metal or stone tile.
PAGE 2
Instrucciones de instalación Nuestros accesorios para baño están diseñados para instalarse fácilmente sin cortes sobre las paredes existentes de la ducha. Complementan cualquier cerámica, porcelana, metal y baldosa de piedra. Parte Posterior Plana Accesorios Para Baño Instrucciones d instalación, uso y cuidado Gracias por su compra, esperamos que disfrute de su nuevo accesorio para baño. Estos productos están diseñados para instalarse fácilmente sobre paredes de duchas nuevas o existentes.