Specifications Sheet

Laminated Wood FLooring 09 64 33
Somerset Hardwood Flooring, Inc.
SPEC-DATA
®
is a registered trademark of Reed Elsevier Inc. The ten-part SPEC-DATA format conforms to the editorial style of The Construction Specifications Institute
and is used with their permission. The manufacturer is responsible for technical accuracy. ©2014 Reed Construction Data. All Rights Reserved.
1
1. Product Name
 SolidPlus
®
Engineered Flooring
• Classic
• Character
• Color Plank
• Specialty
• Wide Plank
2. Manufacturer
Somerset Hardwood Flooring
P.O. Box 1355
Somerset, KY 42502
Phone: [phone]
Fax: [phone]
Website: www.somersetfloors.com
Email: [e-mail]
3. Product Description
Basic Use
Engineered hardwood flooring is made in the USA for light
commercial and residential applications. Somerset Hardwood
Flooring is a Forest Stewardship Council (FSC) certified company,
adhering to best forest management practices, thereby assuring
that Somerset products are environmentally responsible.
Composition and Materials
The Somerset SolidPlus engineered flooring wear layer is produced
from domestically grown and harvested Appalachian hardwood and
affiliated with the National Wood Flooring Association, (NWFA). A
variety of North American species are available.
All Somerset SolidPlus engineered flooring is Lacey Act compliant
and carries a 50-year finish (residential) wear layer warranty and a
5-year finish (light commercial) wear layer warranty. All Somerset
flooring carries a lifetime structural warranty.
Benefits
Factory-finished flooring offers a consistent, high quality finish,
significantly faster job completion without the excessive dust,
finish off-gassing and prolonged cure times of onsite finishing.
SolidPlus engineered flooring is eco-sensible: the same block of
wood used to manufacture one solid piece of
3
⁄ 4 inch flooring
produces four to five 3 mm wear layers for SolidPlus engineered
flooring. The cross grain construction offers greater dimensional
stability than solid wood. SolidPlus engineered flooring may be
installed over radiant heat, below grade (basements) and may be
professionally sanded.
See Table 1 for additional features.
Sizes
All Somerset SolidPlus engineered flooring is
1
⁄ 2 inch (13 mm)
thick. See Table 1 for face widths and plank lengths.
Grades
Classic, Color Plank, Specialty and Wide Plank Somerset
SolidPlus engineered flooring uses a proprietary grade that
meets or exceeds NOFMA Standard.
The Character Collection includes, but is not limited to, small
open knots, mineral streaks, worm holes, heartwood, sapwood
and burls. See Table 1 for further information.
Colors/Finishes
All Somerset SolidPlus engineered flooring is finished with the
Ultimate
™
Finish—an advanced, abrasion-resistant, UV-cured
formulation of aluminum oxide and urethane.
For appearance, wood and stain finishes, see Table 2.
Accessories/Moldings
 Quarter round
 Stair nose
 Threshold
 T-Mold
 Reducer