User's Manual

GRA BER

Adding Individual Control Back After Creating a Group

Adding individual control to shades which are part of a newly formed group. This remote will now be referred to as the

secondary control.

Adding a Secondary Controller

1. Starting with the primary control, press and release the

program button on the back side of the current remote

twice in rapid succession (one second between taps).

2. The LEDs will ash alternating amber and green to identify

inclusion mode.

3. Press and hold the program button on the secondary

remote control until the LEDs ash green, then release the

button.

4. Both the primary and secondary remote LEDs will ash

green, then off conrming inclusion.

Hold

5. The secondary control is now ready for nal steps to

control the shade.

6. Press and release the program button on the back side of

the secondary control once. The LEDs will alternately ash

green.

7. Press and hold the program button on the target shade

headrail or motor end until the LED ashes green, then

release the button.

8. The LED on the secondary control will turn green and the

shade will jog.

9. Both the primary (group) and secondary (individual)

controls will now operate the shade.

Repeat this process on all shades you want to individually

control.