User's Manual

GRA BER

Basic Shade Control

Control Features

Home Button − Single-Channel Remote

Upon rst power up, you will see a green light illuminate on the headrail or motor end of the shade. This will happen

whenever power is rst applied or restored after an outage. Press the UP or DOWN button to operate the shade.

Note: you can press and release the opposite directional button to stop the shade while it is in motion.

Operating your shade with the two-button remote or optional single-channel remote.

button: Acts as a STOP button while shade is in

motion. It can also be programmed as a quick way to

bring shades to your preferred intermediate position.

1. Press and releasing while your shade is at rest

will bring your shade to your position.

2. Press and releasing while the shade is in motion

will stop the shade.

Press and

release the

UP button

to fully open

the motorized

shade.

Press and

release the

DOWN button

to fully close

the motorized

shade.

Your controls have been pre-programmed to control your shade. The upper and lower limits and

position have already been set. If you are not satisﬁed with the default upper, lower, or position

of your shade, see steps in the following sections of this manual.

UP Button

DOWN Button

HOME Button

(Intermeidate/favorite)