User's Manual

GRA BER

Each shade is pre-programmed from the factory to operate up and down corresponding to the appropriate buttons on

your Virtual Cord. However, if the directions are inadvertely reversed, follow these steps to return the shade to

proper operation.

All programming steps are associated with a time-out feature to preserve battery life.

Reversing Motor Direction

1. Move the shade to any position between the

upper and lower limits by pressing and

releasing the directional buttons.

The shade will jog and the LEDs on the motor will

begin to blink green and red and the LEDs on the

remote will blink green.

Shade direction has now been reversed; however,

the upper and lower limits have been maintained.

2. Press and hold UP and DOWN buttons

until the LED light turns amber then

release buttons.

3. Press and hold the UP and DOWN buttons

until the LED turns amber then

release buttons.