Instructions

3.2 Fitting the name tag

[1]. Turn the call button anticlockwise until the engraved marking then remove.

[2]. Remove the round to access the name plate label.

[3]. Write your name on the white label using a permanent marker, then replace the

label and its membrane in their housing.

[4]. Remount the call button on the door station using the marks, and then turn

clockwise until it locks.

3.3 Connecting the door station

3.3.1 To a Somfy gate drive

[1]. Disconnect the motor from the mains power supply.

[2]. Remove the cover from the control cabinet or from the motor containing the electronics.

[3]. Connect the door station dry contact output (COM and NO) to the drive electronics. It is preferable to refer to the gate drive

instructions to connect the door station to the key contact input on the drive.

Door station

M- M+ L- L+ NO COMNC

Somfy drive electronics

Connect... to the START terminals to the BUS terminals to the numbered terminals

COM 5 3 3

NO 6 4

5 (for complete opening)

6 (for pedestrian opening)

Note: To connect the door station to another brand of gate drive, please refer to the installation guide for that drive.

3.3.4 To an electric latch/lock

Connect the door station output to the latch/lock in

accordance with the diagram.

Observe the +/- polarity if indicated in the latch/lock instructions.

1 2

12V 800 mA max

L- L+

* not provided