User's Manual

ManualsBrandsSOMMER Antriebs- und Funktechnik ManualsElectronicsReceiver module, e.g. for garage door operator

Table Of Contents

42 en

Operation

Resetting all values

All learned values can be reset (e.g. learned in force values

for closing and opening the door).

 Press the Reset button on the controller housing (1) until

the lighting LED “Status“ goes out. While pressing, the

LED “Status“ blinks.

 Release the Reset button. The lighting (2) and the LED

“Status“ blink.

The drive must subsequently be relearned, see chapter Using

for the first time “Programming the drive”.