Operating Instructions and Installation Instructions

Installation
t
– 9
Additional pulse transmitters are: hand-held transmitters,
Telecody, wireless indoor switches and key switches. In the
case of the hand-held transmitter, Telecody or the wireless
indoor switches, a connecting line to the drive is not required;
consult your dealer.
Adjusting the top roll of a sectional door
Selection of installation variants
NOTE!
Select the desired installation variant.
The power supply lines must be adapted for the installation
variants (A/C)!
ATTENTION!
The chain cover is not packaging. Do not remove it!
Make sure that the chain is always completely clipped into the
chain cover and all parts of the chain cover have been pushed
together so they are ush.
V
V
CB
A
V
ok
7 7
Preinstallation of installation
variant A/C
NOTE!
Dispose of the packaging according to locally applicable
regulations.
Open the package and inspect the delivery scope.
ATTENTION!
Make sure that all components are not lying directly on a hard
surface. To protect the components, place cardboard, covers
or other soft surfaces underneath.
Remove the drive from the packaging.
1
1
2
Loosen the guide idler (1) and push it in the direction of the arrow;
fold out the chain guide (2).