Installation Instructions

30
46900V001_Rev-D_EN
6. Installation
Open the door fully for this. The motor carriage
moves to the door OPEN position on the guide idler
until a click noise is heard.
⇒ The door OPEN end position is set.
“clic”
Fig. 18 Fig. 19
NOTE
In the case of an emergency release, the
door could independently open or close
itself due to a broken spring or incorrect
setting of the weight balancing. The
operator could be damaged or destroyed.
Check the emergency release regularly.
INFORMATION
It can be locked and released in any door
position.
18. Move door to centre position.
⇒ The motor carriage moves with it.
19. Pull the emergency release cord.
⇒ The motor carriage is locked.
⇒ The door can only be moved by the operator.
20. Check to make sure no part of the door projects into
public footpaths or roads.
WARNING
Danger due to projecting parts!
Gate leaves or other parts must not
project into public roads or footpaths.
This also applies while the door is
moving.
This may cause serious injury or death
to persons or animals.
► Keep public roads and footpaths clear
of projecting parts.
⇒ Installation of the operator is complete.