Instruction Manual
32
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
INSERT-STYLE ELECTRIC FIREPLACE
FEATURES
● Insert-style electric fireplace with built-in fan heater, for warming the air of indoor premises ● built-in energy saving LED light source ● realistic glowing
log and flame effect, which can be used independently ● adjustable brightness ● switchable heating stages (1000 W / 2000 W) ● electronic thermostat
● weekly program ● window opening detection ● overheating protection ● remote control
OPERATION
The appliance can be controlled by the buttons on it or by remote control. Around the warm air outlet, the casing and the glass can be hot! Touch the
foldable grid only in front of its part above the warm air outlet and the buttons. Touch the appliance’s switches from the front, so that your hand does not
cross the warm air outflow, because it can be hot. When you switch it on for the first time, you may feel a slight smell, which is a natural phenomenon.
It is not dangerous and it slips by soon.
Set the main switch (6) to I (on) position, then the unit emits a short beep. The appliance can be switched on or off using the I/O push-button on the
front of the appliance. By being switched on, the flame effect will begin to operate only, without any heating function. Holding the I/O button pressed
will toggle among five brightness settings for the flame effect. The built-in fan heater can be activated in two stages, 1000 W and 2000 W by using the
push-buttons. Pressing the same buttons again will switch off the corresponding heating stage. The appliance can be switched off anytime using the I/O
push-button. The ON / OFF button (9) on the remote control functions in the same way as the I/O button on the appliance. The 1000 W and 2000 W
buttons (13 and 14) on the remote can be used to switch on or off the corresponding heating stages. The currently selected stage can be checked on
the appliance. With the help of the remote control’s „+”, and „-” button, you can set the desired temperature, between 15 °C and 30 °C. The DIMMER
(15) button can be used to adjust the brightness of the flame effect in 5 increments.
To set the date and the time, turn on the unit with a remote control on/off button (9), then press the DATE / TIME button (10). First select the day, by
pressing the „▲”, or „▼” symbols of the selector button (11) on the remote control. Press the DATE / TIME button again (10), then set the clock using
the selector button’s „+” and „-” buttons. Press the DATE/TIME button (10) again, then set the minute using the selector button’s „+” and „-” buttons.
Press the selector button’s (11) „OK” symbol to store the set time.
SUN MON TUE WED THU FRI SAT
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
To activate the window opening detection function, press the remote control’s [
] push-button (24). If the [ ] symbol appears on the product’s
display, the window opening detection is switched on. When the appliance detects a sudden drop in air temperature, it switches off for energy saving
reasons. In this case, the [ ] symbol flashes on the display. If the device switches off like this, it will not switch itself back automatically for 1 hour.
Pressing the remote control’s [ ] push-button (24) repeatedly you can switch this function off, then the [ ] symbol cannot be seen on the display.
Timer function
The unit can store up to 9 programs at the same time, for each program you can set the on / off time. The maximum length of each program can be set
to 23 hours and 50 minutes. Before setting the timer, chose and activate the desired heating level.
Set the timing
1. Press the PROG SET button on the remote control (18)
2. Use the “+” or “-” symbols on the selector button (11) to select the desired program number (20)
3. Press the PROG SET button on the remote control again (18)
4. Use the “▲” or “▼” symbols of the selector button (11) to move the cursor (27) to the desired day (28) and press the “+” symbol to select it. Press
“-” to remove previously selected days
5. Press the PROG SET button on the remote control again (18)
6. Use the “+” or “-” symbols of the selector button (11) to select the switch on time (hours) (23)
7. Press the PROG SET button on the remote control again (18)
8. Use the “+” or “-” symbols on the selector button (11) to select the switch on time (minutes) (23)
9. Press the PROG SET button on the remote control again (18). The display will show “OFF” (21)
10. Use the “+” or “-” symbols on the selector button (11) to select the turn-off time (hours) (23)
11. Press the PROG SET button on the remote control again (18)
12. Use the “+” or “-” symbols of the multi selector (11) to select the time off (minutes) (23)
13. Press the PROG SET button on the remote control again (18)
14. Use the “+” or “-” symbols on the selector button (11) to select the desired temperature (20)
15. Press the selector button (11) to save the program by pressing the OK button.
16. Use the TIMER ON / OFF button (16) on the remote control to activate the timer function. When activated, the display shows the timer indication (29).
List of scheduled timings
1. Press TIMER ON / OFF on the remote control (16)
2. Press the PROG SET button on the remote control
3. Use the “+” or “-” symbols on the selector button (11) to see the switch on times assigned to each program
4. To display the switch-off dates, press the ▲ symbol on the selector button (11), then use the “+” or “-” buttons to view the switch off times assigned
to each program
5. Press C on the remote control (17) to cancel each program