Instruction Manual

2
SOLDERING IRON WITH THERMOSTAT
IMPORTANT SAFETY INSTRUCTIONS
READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR
LATER REFERENCE!
WARNINGS
• ATTENTION! Some parts of this device can become very hot and cause burns and fire!
Particular care should be taken when children or vulnerable people are present!
• Before use of the product, please read this instructions manual and keep it for future reference.
The original document was prepared in Hungarian language. This appliance can be used
by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision. After removal of the packaging, inspect the product
for possible damage during shipment. Keep children away from packaging if it contains bags,
batteries or other hazardous items!
• This product is manufactured for use by professionals. Using it professionally also requires
knowledge that we cannot go into in this description.
• Do not leave the appliance unattended and do not place it near flammable materials when it is
working or when it has been switched off but is still hot.
• Please note that - due to its properties - the product can be accident-prone!
• Only grip the handle when the device is hot!
• Work with it only in a well-ventilated room and do not inhale the toxic fumes produced during
soldering!
• It is forbidden to cover it, covering it may cause fire hazard and electric shock!
• In addition to the metal parts, heating of the covering is also a normal phenomenon.
• It must cool down naturally, for example, do not immerse the soldering tip in water!
• Do not touch the heating surfaces with the power cord! If damaged, disconnect the power
immediately and do not continue to use the product!
• Unplug the power cord after use!
• Keep the device in a place, where the power supply plug can be easily reached and unplugged.
Run the power supply cable so that it cannot be accidentally disconnected, and it does not
create a risk of stumbling. Do not run the connection cable under carpets, mats, etc.
• It may only be connected to a standard 230V~/50Hz socket with a protective contact!
• With consideration to the presence of supply voltage, observe the general rules of contact
protection.
• You must not touch the device or the power cord with wet hands!
EN -Safety and maintenance / H - Biztonság és karbantartás / SK - Bezpečnosť a údržba /
RO - Siguranţă și întreţinere / SRB-MNE - Bezbednost i održavanje