Specifications

©2019 Sonance. All rights reserved. Sonance is a registered trademark of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product
specification information visit our website: www.sonance.com
991 Calle Amanecer • San Clemente, CA 92673 USA • [phone] • FAX: [phone] • Technical Support: [phone]
Specifications
02.14.19
LIMITED THREE (3) YEAR WARRANTY
Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/
Distributor, will be free from defective workmanship and materials for the period stated above. Sonance will, at its option and expense, either repair the
defect or replace the Product with a new or remanufactured Product or a reasonable equivalent. Please visit our website and owner’s e-Manual for complete
warranty and exclusion information.
SONANCE GARDEN SERIES
Dimensions
SGS SAT
Speaker Diameter: 4.52” (114.8mm)
Height: 16.47” (418.28mm)
Depth: 6.73” (171mm)
Height
Diameter
Depth
SGS SUB
Canopy Width: 14.96” (380mm)
Enclosure Width: 12.2” (310mm)
Canopy Height: 7.43” (188.75mm)
Enclosure Height: 17.4” (442mm)
Overall Height: 24.83” (630.75mm)
Overall
Height
Enclosure Width
Canopy Width
Enclosure
Height
Canopy
Height
Tweeter:
Woofer:
Frequency Response:
Crossover Frequency:
Impedance:
System Impedance:
Power Handling:
Sensitivity:
Enclosure Material:
Mounting Threads:
Dimensions (L x Dia.):
Shipping Weight:
SGS Satellite Speaker
3/4” (19mm) Polyurethane dome
3.5” (98mm) Anodized aluminum
cone & Santoprene™ surround
80Hz - 20kHz +/-3dB
-
30 Ohms nominal
8 Ohms nominal
50 watts minimum; 200 watts maximum
87dB 2.83V / 1 meter
Non-corrosive, high-heat ABS sealed
enclosure
1/2” NPS (National Pipe Standard)
6.5” L x 4.125” Dia. (165mm x 105mm)
5.0lbs (2.4kg) each
SGS Subwoofer
-
10” (254mm) dual voice coil, polypropylene
& Santoprene surround
35Hz - 100Hz +/-3dB
100Hz
8 Ohms nominal per voice coil
8 Ohms nominal
200 Watts
90dB Sensitivity @ 2.83V / 1 meter
High Density Polyethylene (HDPE) non-corrosive
sealed enclosure
-
24.8” x 15” (630mm x 381mm)
40 lbs (19kg)
18 gauge - up to 100 ft. (30m) 16 gauge - up to 150 ft. (45m) 14 gauge - up to 200 ft. (80m)