HARDSCAPE SUBWOOFER INSTRUCTION MANUAL HS12T SUB
Introduction Subwoofer Thank you for purchasing a SLS Subwoofer. When properly installed, this subwoofer will provide you with years of outdoor entertainment pleasure. To get the most out of your new subwoofer, please read this manual thoroughly before you begin installation.
Subwoofer Installation NOTE: SONANCE STRONGLY RECOMMENDS THE USE OF 14/4 DIRECT BURIAL WIRE FOR DISTANCES UP TO 200 FEET AND 12/4 DIRECT BURIAL FOR LONGER RUNS. KEEP WIRES AS SHORT AS POSSIBLE TO MINIMIZE RESISTIVE WIRE LOSSES. Sonance Landscape Series systems allow for speakers to be daisy chained together. In a typical system with one zone of audio, run a stereo or 4 conductor speaker wire from the amplifier to the closest speaker.
Specifications Model: HS12T SUB Woofer: 12” (305mm) polypropylene cone with a rubber surround Frequency Response: 22Hz – 100Hz ±3dB Transformer Taps: 70V 300W, 150W, 75W 100V 300W, 150W 8 Ohms Enclosure Material: Low density polyethylene (LDPE) Crossover: 100Hz Available Finishes: Dark brown textured enclosure Dimensions: W x H x D) 16.14” x 16.14” x 16.14” (410mm x 410mm x 410mm) Shipping Weight: 64.14 lbs (30kg) 16.14” (410mm) 16.14” (410mm) 16.
LIMITED FIVE (5) YEAR WARRANTY Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the period stated below. Sonance will at its option and expense during the warranty period, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.
