THE NEXT GENER ATION IN INVISIBLE SOUND “The new reference in performance and installation flexibility for invisible loudspeakers” Todd Ryan, Chief Speaker Engineer Sonance.
IS2 The IS2 is designed for tight installations or very small spaces yet delivers sound that is only bested by the IS4. SPECIFICATIONS Tweeter Woofer Frequency Response Impedance Power Handling Sensitivity Dispersion Finish Overload Protection Cutout Dims Without Enclosure (WxHxD) Cutout Dims With Enclosure (WxHxD) Enclosure (WxHxD) Shipping Weight Environment Temperature 4 sq. in (27 sq. cm) planar diaphragm, driven by a 1” (25mm) voice coil 50 sq. in (320 sq.
IS4 SST The IS4 SST features single stereo technology, the ability to drive one speaker with two inputs. The IS4 SST is impedance matched to ensure proper amplifier protection. The perfect choice for small areas, such as hallways and corridors where two speakers would be impractical or impossible to install.
IS4 C The IS4 C is for any commercial or residential settings where a 70 or 100 volt system is being used. The IS4 C features all the industry standard tap settings as well as an 8-ohm bypass. The IS4 C is an extended bandwidth, wide dispersion loudspeaker designed for ceiling or wall mounting in commercial/professional installations in airports, hotels, boardrooms, cruise ships, casinos, convention centers, restaurants, offices, houses of worship and retail stores.
SMALL SPACE SAVER For IS2 SPECIFICATIONS Dimensions (WxHxD) Part# 15-1/2” x 11-5/8” x 4-1/4” (393mm x 295mm x 107mm) 92722 LARGE SPACE SAVER For IS4, IS4 sst, isw SPECIFICATIONS Dimensions (WxHxD) Part# 15-1/2” x 24-1/4” x 4-1/4” (393mm x 616mm x 107mm) 92723 For further instructions on using SA Space Savers with new Invisible Series products, please refer to www.sonance.com/products/invisible or use QR code.
