MAG5.1R I N S T R U C T I O N M A N UA L MAG6R | MS8 SUB | MAG6R SUR 03.15.
MAG5.1R INSTRUCTION MANUAL Important Safety Information • Objects have fallen, or liquid has been spilled into the amplifier. You should always follow these basic safety precautions when using your Sonance MAG5.1R, to reduce the risk of fire, electric shock, and injury to persons: 1. • The amplifier has been exposed to rain. • The amplifier does not appear to operate normally or exhibits a marked change in performance.
Introduction to the room’s dimensions) that can make the subwoofer’s bass performance sound uneven at different listening locations. Experiment with different subwoofer locations until you find one that produces strong bass that sounds clear (without boominess) at the seating locations while maintaining the sound’s impact. Thank you for purchasing MAG5.1R. When properly installed your new speakers will give you years of entertainment pleasure.
MS8 SUB - Connection 2. The speaker’s terminals are spring-loaded. Push the top of each terminal down to open the connector and insert the exposed wires into the holes in the spring terminals. Your MS8 SUB will need both AC power and a standard subwoofer cable with RCA connectors on both ends. Follow the connection example in figure 6 below for connecting the MS8 SUB directly to your A/V home theater receiver.
MS8 SUB - Volume Control 1 The volume control on the rear panel of the MS8 SUB (figure 7) should normally be set to the MAX or FULL CLOCKWISE setting. 2 3 4 5 A/V home theater receivers have built in settings for volume level for subwoofer and satellite speakers. The settings for the volume volume can be adjusted in the on screen menu for your A/V home theater receiver. By setting the MS8 SUB in this way the correct output level will be applied in your A/V home theater receiver and not in the subwoofer.
MAG5.1R SPECIFICATIONS MAG6R SPEAKERS Tweeter: 1” (25mm) silk dome, Ferrofluid-cooled, pivoting, in acoustic back chamber Woofer: 6 1/2” (165mm) glass fiber cone, rubber surround, pivoting Frequency Response: Imedance: Power Handling: Sensitivity: Grille: Dimensions (Dia.xD): Cut-Out Diameter: Weight: 45Hz – 20kHz ±3dB 8 ohms nominal; 6 ohms minimum 5 watts minimum; 125 watts maximum 89dB SPL (2.83V/1 meter) Perforated steel 9 3/4” x 4 3/4” (248mm x 121mm) 8 1/4” (210mm) 3.7 lbs (1.
LIMITED THREE (3) YEAR WARRANTY Sonance warrants to the first end-user purchaser that this Sonance-brand product (“MAG5.1R”), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the period stated below, except for the grille, which is warranted for five (5) years. Sonance will at its option and expense either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.
©2019 Sonance. All rights reserved. Sonance and Sonamp are registered trademarks of Dana Innovations. Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product specification information visit our website: www.sonance.com SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (949) 492-7777 www.sonance.com 7 03.15.
