User Manual

MAG6.1 SAT
Satellite Speaker
Speaker Layout Planning
The MAG6.1 SYSTEM is designed to deliver a seamless,
evenly dispersed sound field in an ‘open air’ environment.
A daisy chain of multiple satellite speakers and a
subwoofer should be strategically placed to create even,
balanced coverage, minimizing ‘hot spots’ and ‘dead zones’
around the outdoor entertainment area (see Figure 1).
3
Subwoofer Bottom Amp Plate
Figure 2 shows the controls and connections located on
the subwoofer bottom amp plate.
Box Contents
MAG6.1 SYSTEM box contains:
(6) Satellite speakers
(6) Removeable speaker stakes
with 1/2” NPS threading
(16) Silicone filled wire nuts
(1) In-Ground subwoofer
SAT
LEFT
SAT
LEFT
SAT
LEFT
SUB
LEFT
&
RIGHT
SAT
RIGHT
SAT
RIGHT
White (+)
Green (-)
Red (+)
Black (-)
SAT
RIGHT
Introduction
Thank you for purchasing the MAG6.1 SYSTEM. When
properly installed, this system will provide you with years
of outdoor entertainment pleasure. To get the most out
of your new system, please read this manual thoroughly
before you begin installation.
MAG6.1 SUB
In-Ground Subwoofer
Figure 1: Wiring Diagram
The satellite speakers should be placed from 8 to 10 feet
(2.4 - 3.1 meters) apart for best coverage. To achieve the
best balance between the satellites and subwoofer, the
subwoofer should be placed as close to the center of the
satellites as possible.
If more bass is required, placing the subwoofer near a wall
or other solid structure will greatly reinforce the low bass
frequencies. In some cases you may want to place the
subwoofer closer to your primary listening position.