User Manual

Recommended Tools
Wire Ties and Electrical Tape
Round Cable Stripper
needed when using 14/4 direct burial wire
Speaker Wire Connection
Connecting the speakers using 14/4 direct burial
speaker wire.
1. Pull the 14/4 wire on the spool to the furthest speaker
location. Leave the wire attached to the spool until the
last speaker has been connected.
2. Starting at the last speaker and every speaker that
follows, create a loop of wire approximately 6” in length.
3. Use the round cable stripper to remove the outside
protective wire jacket to expose the 4 individual
color-coded wires. If you are unfamiliar with using a
round cable stripper, please go to YouTube and search
for videos on ‘Using a Round Cable Stripper’. Or visit
the specific brand of cable stripper’s company
website for detailed instructions.
5
4. Use a wire tie to keep the wire loop intact and act as a
strain relief.
PLEASE NOTE: REGARDING THE 4 COLORED WIRES,
THE RED (+) AND BLACK (-) ARE USED FOR THE
RIGHT CHANNEL, WHITE (+) AND GREEN (-) FOR
THE LEFT CHANNEL.
Wire Stripper
accommodates up to a 12 gauge wire
5. Cutting the wires. In this example, we want the first
speaker to be connected to the right channel so we cut
the red (+) and black (-) wires only. Leave the white and
green wires intact.