M AG 0 6 V 3 OUTDOOR SPEAKER I N ST R U C T I O N M A N UA L Scan QR Code for product installation video
SONANCE OUTDOOR SPEAKER MAGO6V3 INSTRUCTION MANUAL INTRODUCTION Thank you for purchasing Sonance MAGO6V3 weather-resistant speakers. When properly installed, these speakers will give you many years of outdoor entertainment pleasure. To get the most out of your new speakers, please read this manual thoroughly before you begin installation. BOX & CONTENTS CONNECTING & ASSEMBLING WARNING: TURN THE AMPLIFIER’S POWER OFF UNTIL YOU HAVE COMPLETED ALL OF THE CONNECTIONS AND HAVE DETERMINED THAT THEY ARE CORRECT.
6. Connect the speaker wires to the speaker’s terminals: A. Strip about .5” of insulation from each conductor and twist the strands together or tin them with solder. B. Press-down on the tops of the connectors to open them. C. Insert the wires into the connector holes (see figure 8). UNLOCK D. Release the connectors. (towards rear FIGURE 8: CONNECTION TERMINALS PIVOTING THE SPEAKER You can rotate the speaker in the bracket to direct the sound toward the listeners. 1.
LIMITED ONE (1) YEAR WARRANTY Sonance warrants to the first end-user purchaser that this Sonance-brand product (product), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the period stated above. Sonance will at its option and expense during the warranty period, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.
